Who has removed their hood blanket???

94DreamGT · Apr 16, 2004

I was thinking of pulling my out, but I want to make sure it doesn't serve a better purpose like keeping the heat down in the engine bay or something etc...

I have no interference right now with it which I know is the main reason people pull them, but it is just plain ugly and parts of it are starting to flake and fall off. I don't think the bare metal underneath it will be any better, but maybe there's a small weight savings as well by taking it off?

Thanks

Jeremy

Dave95GT · Apr 16, 2004

I took mine off a few years ago, havent had any problems with it

Pushrod · Apr 16, 2004

mines been gone for about a year, no problems here either

mustangramair · Apr 16, 2004

I have run both ways, no problems either way. i Think it's just for sound deadening.

VibrantRedGT · Apr 16, 2004

I took mine off to clean it and paint it. Just looks ugly to me without it.

1105 · Apr 16, 2004

Its purpose is to try and snuff out the fire if the engine ever does catch on fire. I'm with Joe on it looks ugly without it on there so I'd just clean it up and put it back on.

94DreamGT · Apr 16, 2004

OK then...how do you clean it? What's the best method?

TrueBlue95GT · Apr 17, 2004

I was told that it keeps the paint on the top of your hood from fading, but most of us don't get that hot anyway.

GTPhreak · Apr 17, 2004

1105 said:
Its purpose is to try and snuff out the fire if the engine ever does catch on fire. I'm with Joe on it looks ugly without it on there so I'd just clean it up and put it back on.

false.

I removed mine months ago...I was going to clean it and put it back on, but oh well, its not going to be there when I get an aftermarket hood anyway.

1105 · Apr 17, 2004

GTPhreak said:
false.

I removed mine months ago...I was going to clean it and put it back on, but oh well, its not going to be there when I get an aftermarket hood anyway.

true

thats just what I was told. I want mine off but it looks better than the underside of my hood

Stangfreak95 · Apr 17, 2004

My car didnt have one when I bought it 2 traps have been cut-out to get the hot air out I assume.

GTPhreak · Apr 17, 2004

Stangfreak95 said:
My car didnt have one when I bought it 2 traps have been cut-out to get the hot air out I assume.

the two cuts are part of a safety recall. the hoods would seperate across the front edge. so they cut the holes, checked for seperation, and if there was non they would put adhesive in there

red94fiveo · Apr 17, 2004

Had mine out for about a month with no problems.

I did mine for clearance issues, unlike most of the other people here. BUt anyway, doesn't seem to advesely affect anything.

HoofnIt · Apr 17, 2004

The plastic 'pins' that hold the hood blanket in place are engineered to melt at a certain temp in case of an engine bay fire. The pins melt, the blanket falls down and supposed smothers and contains the fire. I'm sure there is a certain amount of noise dampening as well.

Stangfreak95 · Apr 17, 2004

GTPhreak said:
the two cuts are part of a safety recall. the hoods would seperate across the front edge. so they cut the holes, checked for seperation, and if there was non they would put adhesive in there

I thought it was the previous owner that cut those holes .. Good to know.

1105 · Apr 17, 2004

Stangfreak95 said:
I thought it was the previous owner that cut those holes .. Good to know.

Same here... I thought the person who had the car before me wanted to make his own ram air for the car.

AZ95GT · Apr 17, 2004

I took mine off like a week after I got my car. I believe its just for noise deadening. I have had no problems at all.

AznStanger3v · Apr 17, 2004

i have an aftermarket hood that doesnt have the blanket on there. It isnt a problem at all. although, the idea of the pins melting and the blanket smothering the fire is an awesome theory.

Venom351R · Apr 18, 2004

if you think about it aftermarket hoods dont come w/ blakets on them so they must not serve to much of a purpose, look at all the stangs running around w/ aftermarket hoods and they dont have any problems

mto502 · Apr 18, 2004

Stangfreak95 said:
I thought it was the previous owner that cut those holes .. Good to know.

Ditto

1105 said:
Same here... I thought the person who had the car before me wanted to make his own ram air for the car.

...and ditto again

I ran into this problem when with the Track Heat intake so we had to remove the hood liner and do a little trimming to get the hood to sit properly. Low and behold there are these two big holes. I'm like WTF ?? This car is completely stock and just like new. I was a little pissed. I thought aboput the previous owner wanting ram air of some sort as well.

My liner is still on. There's very little weight savings by removing it and since mine is still very clean I like the Pony pic on it anyway.

Who has removed their hood blanket???

94DreamGT

Dave95GT

bAd mUtha

Pushrod

mustangramair

Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

1105

I AM the random post master...bow down

94DreamGT

TrueBlue95GT

Member

GTPhreak

1105

I AM the random post master...bow down

Stangfreak95

add a 4

GTPhreak

red94fiveo

New Member

HoofnIt

Stangfreak95

add a 4

1105

I AM the random post master...bow down

AZ95GT

New Member

AznStanger3v

Active Member

Venom351R

mto502

Similar threads

Who has removed their hood blanket???

bAd mUtha

Member

"STANGNET'S PENGUIN SMACKER"

I AM the random post master...bow down

Member

I AM the random post master...bow down

add a 4

New Member

add a 4

I AM the random post master...bow down

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency