when i first got my blower back from vortech, my belt lasted no longer then 1 day..i opened the hood and see my blower belt wrapped around the INSIDE of the crank pulley... i put the new belt on to see what was misaligned... the belt was riding the outside edge of the tensioner pulley. This would push the belt INSIDE and make it jump... after shimming the tensioner until i got it right, i put the belt back on.. (i noticed that the blower pulley had a patch of sharp edges on the grooves but thought nothing of it).. its been 3 weeks since without a problem. Today i was driving and i heard a loud clank... popped the hood and sure enough i saw the belt hopped a groove inside the blower pulley and was shredded.. what could cause the problem? the pulleys???? People tell me to check the alignment of the pulleys... If so, how could that be the case if you cannot adjust the crank/blower pulley??