Why oil coming through PCV valve ???

[Slow5.0]

Why oil coming through PVC valve ???

Today I removed Cobra Intake Manifold (trying to find why car run funky)
and find oil in all Intake Ports (Upper & Lower)
Oil coming through PVC valve

 

[1105]

I think EVERYONE on here has that problem. I know RC and Joe had the same peoblem with their cars because of the blower, and I know RC riged something up to stop it. I get oil in my upper intake which is normal, as long as it doesnt form a big pool of oil in it.

 

[stang_gt_1994]

Its because the baffles on aftermarket intakes are much smaller then stock. It happens sometimes. I havent had that trouble with my PVC valve yet.

 

[VIPERn94Five-0]

it seems to be normal....i had a little bit when i took my upper off to paint it...if i remember right Paul (killercanary) usually has quite a bit of oil in his upper when he takes it off....i think there is something you could rig up to help it...ask Vib or RC how there setup is working...

Anthony

 

[Slow5.0]

OK guys ,I had off upper intake tonight ,BUT tell me this , how much is too much oil in upper intake , my oil pressure is little bit higher than before , its on M , before between O and R
I have other problem so I been thinkin meybe oil in intake cause my other problem , check out here http://forums.stangnet.com/showthread.php?t=450524

 

[VIPERn94Five-0]

our stock oil pressure POS is just a dummy...it just reads wether or not you have oil lol....dont go by that....


Anthony

 

[94GTLaserRC]

I stopped worrying about that stuff. I havent rigged up something on that part yet, but you can just get a filter that goes on an air compressor and insert it b/t the upper and lower intake in the rubber line..

RC