Why you should check your new pushrods

BlackBaer5.0 · Mar 24, 2007

While assembling my engine, I picked up the pushrods and heard one rattle..ah crap.. Called comp cams , and they sent me one out no questions asked..

So I got the part the next day, and I went to put them on, I decided to take a brush to the inside of all the other pushords... all clean..

then I took a metal coathanger.. and kinda reemed them out.. just stuck it in the ends and moved it around nothing really hard ..

and this is what came loose after , bits of metal slag from them welding it..

So I called them again.. and they are sending me out 3 new ones.. but yet another weekend with no engine work..guess I should go out and play..

View attachment 394186
View attachment 394189
View attachment 394191
View attachment 394193
View attachment 394195

BlownFiveLiter · Mar 24, 2007

Well isn't that lovely? *marks Compcams off my list of future manufacturers*

LB0193 · Mar 24, 2007

exactly no thanks I bought trickflow pushrods and they were perfect

BlownFiveLiter · Mar 24, 2007

Same here. TFS heads, cam, rockers, pushrods.

BlackBaer5.0 · Mar 24, 2007

Im not saying comp cams is bad.. hell they sent me a new one overnight... it was just the fact I found two more that got me thinking...

Why does slag get in there.. I know they weld it electrostaticly, but damn thats alot of metal .. You would think they would check for that stuff when made..

oh well..

BlownFiveLiter · Mar 24, 2007

It looks like it probably came from when they machined the ends, but you'd hope they'd do some sort of QA on them where that would be checked along with assuring the finished product was of acceptable quality.

86bluecobra · Mar 24, 2007

yikes. And I didn't check either set i installed in my truck or mustang. Least nothing has happened yet.

88gt · Mar 24, 2007

StangGT1995 said:
It looks like it probably came from when they machined the ends, but you'd hope they'd do some sort of QA on them where that would be checked along with assuring the finished product was of acceptable quality.

My thoughts exactly...Where's the "Quality Control"???

MahFiVeOh · Mar 24, 2007

StangGT1995 said:
It looks like it probably came from when they machined the ends, but you'd hope they'd do some sort of QA on them where that would be checked along with assuring the finished product was of acceptable quality.

I work in a machine shop and EVERY part we make is checked for burrs or metal filings of any kind before the stuff gets sent out.That just looked like someone wasnt doing their job correctly.

Glad you caught it before something bad happened.

Blandnuts · Mar 24, 2007

That sucks, good thing they backed their product up and sent new ones out. Mine sure didn't have that problem....

getusummm · Mar 25, 2007

Makes me like my Lunati one piece pushrods even more.

87AODGT · Mar 25, 2007

I went with Manley pushrods seeing as how I work there, they definately didn't have any slag in them

4G-KDMP · Mar 25, 2007

better to be safe than sorry.

stangster50 · Mar 25, 2007

i dont think i would even use them..

Why you should check your new pushrods

BlackBaer5.0

Member

BlownFiveLiter

have car, will race....wait, it doesn't run

LB0193

Member

BlownFiveLiter

have car, will race....wait, it doesn't run

BlackBaer5.0

Member

BlownFiveLiter

have car, will race....wait, it doesn't run

86bluecobra

Advanced Member

88gt

MahFiVeOh

Blandnuts

I don't swallow; I only swoosh

getusummm

Member

87AODGT

4G-KDMP

stangster50

New Member

Similar threads

Why you should check your new pushrods

Member

have car, will race....wait, it doesn't run

Member

have car, will race....wait, it doesn't run

Member

have car, will race....wait, it doesn't run

Advanced Member

I don't swallow; I only swoosh

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency