Will a 94-95 upper intake fit on my 92?

[calpolymustang]

Im dropping a 1992 5.0 HO motor in a 41' Mercury Woodie and the trottle body has clearance issues with my battery. I would like to angle the intake 45degrees like on the SN95 intakes, but will the upper manifold swap? i dont know if the mounting is the same or if they have different vacuum/wire/hose connections compared to the stock 92 intake. i really dont have the time to replace the lower manifold. another idea is to run a 45 elbow adapter between the manifold and the egr block

please let me know
thanks

 

[86bluecobra]

i'm pretty sure it will the 94-95 just have 5.0L H.O. in em they were just heavy pigs.

 

[1SLO306]

i'm pretty sure it will the 94-95 just have 5.0L H.O. in em they were just heavy pigs.

:Word: it'll work

 

[18mustangs]

Im dropping a 1992 5.0 HO motor in a 41' Mercury Woodie and the trottle body has clearance issues with my battery. I would like to angle the intake 45degrees like on the SN95 intakes, but will the upper manifold swap? i dont know if the mounting is the same or if they have different vacuum/wire/hose connections compared to the stock 92 intake. i really dont have the time to replace the lower manifold. another idea is to run a 45 elbow adapter between the manifold and the egr block

please let me know
thanks

Yep, and here's what you'll need to use it. You'll either need a SN95 GT or Cobra intake (or aftermaket intake with the elbow adapter), the SN95 TB, the throttle cable, the cruise control cable, SN95 EGR valve with EGR tube, and SN95 passenger side header with EGR bung, the Ford Racing TPS adapter harness (this plugs onto your Fox TPS and allows you to directly plug into the SN95 TPS sensor...us SN95 Fox conversion guys got screwed..we had to splice wires into the TPS). One issue you need to be aware of is the intake clearance. You may need to run a 3\8" spacer so the EGR flange clears your valve covers, and the oil fill neck on your valve covers might have clearance issues with the 45* elbow. That's all the parts you'll need. PM me with any questions.
Tim