Will my mods get me into the 14's?

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 26, 2004

#1

• Jun 26, 2004

• #1

I ran a 15.47 on the run before my trans blew which was the fastest its ever run. Now that I've got a 2500 rpm stall and a HD trans what do you guys think? Are 14's possible? My best 60' was 2.20 before the stall and trans work. Thanks!

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 27, 2004

#2

• Jun 27, 2004

• #2

ttt

 

W

wytstang

Mustang Master

Mar 14, 2004

4,988

4

78

Summerville,SC missing South Fl. weather :(

Jun 27, 2004

#3

• Jun 27, 2004

• #3

I would venture to say yes. You have 4.10s that’s going to help you out tremendously. You need to find some traction and bring those 60' down. Hell advance the timing it free hp, lower rear tire pressure to 25 psi inflate front tire psi 40, remove front sway bar(install after you finish racing), remove some weight pass seat, rear seat,ect... good luck.

 

slvrbullit302

New Member

Jan 6, 2004

986

1

0

Alabama

Jun 27, 2004

#4

• Jun 27, 2004

• #4

I agree that a good set of tires either ET streets or a set of drag radials will get you in the 14's with no problem.

 

S

SuperDust22

The Power of Pixie Dust?!

Oct 19, 2003

1,821

0

0

Gilbert,AZ

Jun 27, 2004

#5

• Jun 27, 2004

• #5

I ran a 14.9 with almost the same mods but i had 373 and stock tanny with shift kit.

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 27, 2004

#6

• Jun 27, 2004

• #6

Well the answer is no. The best I could get was a 15.42 on drag radials. This is getting ridiculous. The freakin Diablo chip cost me 2/10's. It shifting at all the wrong rpms, like holding 1st to 6200 and 2nd to 5800. I turned the chip off and still couldn't get past 15.42

I know the vert is heavy and all but I'm getting frustrated.

 

S

stunner6910

New Member

Oct 31, 2003

580

0

0

south texas

Jun 27, 2004

#7

• Jun 27, 2004

• #7

get a dyno tune

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 27, 2004

#8

• Jun 27, 2004

• #8

YOU SUCK!!!!

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 27, 2004

#9

• Jun 27, 2004

• #9

By the way stunner, wanna buy a chip?

 

S

stunner6910

New Member

Oct 31, 2003

580

0

0

south texas

Jun 28, 2004

#10

• Jun 28, 2004

• #10

how much?

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 28, 2004

#11

• Jun 28, 2004

• #11

$100.

 

mystang94gt

New Member

Jun 14, 2004

951

0

0

Bay Area, CA

Jun 28, 2004

#12

• Jun 28, 2004

• #12

Man are verts really that much hevier? I ran 15.2 when my car was bone stock, not even a k & n air filter. And that was street tires and stock gears by just pressing the brake and launching at like 1500 rpm's. How much do those verts weigh?? I would think you should be able to pull 14's no sweat with the stall converter. What were your 60 ft times like??? Did you lower the tire pressure in those d/r's to like 15 psi? They wont hook up unless you lower the tire pressure and roast the **** out of them to get em nice and sticky.

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jun 28, 2004

#13

• Jun 28, 2004

• #13

60' was 2.26. The tires were at 15 psi. I burned them for a good 5-6 seconds at 3500 in second. It weighs 3405 or 3585 with me in it. One of us needs to go on a diet.

 

S

stunner6910

New Member

Oct 31, 2003

580

0

0

south texas

Jun 28, 2004

#14

• Jun 28, 2004

• #14

what will the chip do for me? i'll give you $100 but what are the advantages?

 

H

HazMat404

Founding Member

May 24, 2002

1,749

0

36

Jun 29, 2004

#15

• Jun 29, 2004

• #15

hrmmm...i think you need to buy my cobra intake when i take it off . i think you should get pretty close to 14's. im hopin you dont have ur stock hpipe on there. if so then you need to buy a new one and ill put it on for ya . i think you will be close tho. after my second gear gets fixed, i want to go to the track bad

 

NEEDA5.0

Founding Member

Jun 13, 2002

563

0

0

Jul 27, 2004

#16

• Jul 27, 2004

• #16

I'll take your cobra intake off of ya when you're ready as long as your available for technical assistance with the install. Yes, the factory h-pipe is still on. I'm waiting for the great state of Illinois to send me an emissions notice before I take it off. I know as soon as I take it off its gonna come.

 

S

stunner6910

New Member

Oct 31, 2003

580

0

0

south texas

Jul 27, 2004

#17

• Jul 27, 2004

• #17

i hope i don't have the same trouble NEEDA5.0. i just got my cobra intake installed and am waiting on the 4.10s as well. looking at your signature, by the end of next week, i'll have everything you have minus the subs(got control arms), stall and the chip i ran a 15.4 @ 92 my first time out, hope with these mods the times get a lot better.


send pm on chip

 

R

red95aodevert

New Member

Jan 28, 2004

64

0

0

Redford, MI

Jul 27, 2004

#18

• Jul 27, 2004

• #18

I have a 95 AODE vert with 4:10's, 3000 stall and DR's + 1 5/8 shorties, 2.5 h-pipe and dumps and I'm running 14.6 with 1.9 60ft. Before I got my chip from JMS I was having a lot of shifting problems. and couldn't get out of the 15's. I'd try giving JMS a call.

 

S

stunner6910

New Member

Oct 31, 2003

580

0

0

south texas

Jul 27, 2004

#19

• Jul 27, 2004

• #19

red95aodevert said:

I have a 95 AODE vert with 4:10's, 3000 stall and DR's + 1 5/8 shorties, 2.5 h-pipe and dumps and I'm running 14.6 with 1.9 60ft. Before I got my chip from JMS I was having a lot of shifting problems. and couldn't get out of the 15's. I'd try giving JMS a call.

Click to expand...

so i'll have shifting problems with the 4.10s. your time is pretty good considering you don't have a lot. how much was the chip and can you provide US with number.

thanx

 

S

SuperDust22

The Power of Pixie Dust?!

Oct 19, 2003

1,821

0

0

Gilbert,AZ

Jul 27, 2004

#20

• Jul 27, 2004

• #20

stunner6910 said:

so i'll have shifting problems with the 4.10s. your time is pretty good considering you don't have a lot. how much was the chip and can you provide US with number.

thanx

Click to expand...

yeah i would like to know too. I have 3.73 would this chip help me at all.

Dustin