Will they? Friend says that with the stock cam I shouldn't have a problem while my other friend said I'd have to notch the pistons. Anyone have any first-hand experience?
I thought the Eddy's were some of the only heads to have 2.02" intake valves to work with stock pistons? I guess if you run a bigger cam then you can run into problems. My TFS heads have 2.02" intake valves, I'm running the stage 1 cam with .499" lift on intake, and have no problems. Might wanna check the valve angle and compare the two before assuming they will work.
I thought the Eddy's were some of the only heads to have 2.02" intake valves to work with stock pistons? I guess if you run a bigger cam then you can run into problems. My TFS heads have 2.02" intake valves, I'm running the stage 1 cam with .499" lift on intake, and have no problems. Might wanna check the valve angle and compare the two before assuming they will work.