Will these work with my setup?

R

Ryan91Saleen

New Member

Apr 18, 2003

173

0

0

Washington

Apr 19, 2004

#1

• Apr 19, 2004

• #1

TFS-2500100
Performance cams need performance parts.

Ford: 289-351W, 1.47 in. diameter, valve spring kit

This kit includes everything you need to install a high performance cam with up to .542 in. of lift on a small block Ford with OEM cast iron heads. It includes valve springs with dampers, chromemoly retainers, valve seals, locks, shims, and a spring height gauge. This kit provides 110 lbs. of seat pressure at an installed height of 1.800 in.

THIS IS FOR A B-303 CAM 1.6 ROLLER ROCKERS? WILL IT WORK? AND WHAT DO I NEED TO PUT THEM IN?

 

R

redterror302

Founding Member

Jun 29, 2002

895

0

0

Mertztown, PA or State College, PA

Apr 19, 2004

#2

• Apr 19, 2004

• #2

I think they will be fine for your combo, but I am no expert. Email them and see what they say. I asked them about those springs usings a steeda #18(same lift as b303) with 1.7's, and they said I would need to go with a double valve spring. I think those are only a single spring with a damper. Just email them, I got a response in about a day or two.

 

R

Ryan91Saleen

New Member

Apr 18, 2003

173

0

0

Washington

Apr 20, 2004

#3

• Apr 20, 2004

• #3

anyone else?

 

BlownStangGT

REPEAT

Founding Member

Jan 22, 2002

3,860

6

58

Lancaster, PA

Apr 20, 2004

#4

• Apr 20, 2004

• #4

I would say they will work....but unless your doing a total rebuild then you do not need to go to crazy, I have seen a ton of people run the stock springs. Its ur call

 

R

Ryan91Saleen

New Member

Apr 18, 2003

173

0

0

Washington

Apr 20, 2004

#5

• Apr 20, 2004

• #5

i hope so they are here at the house and we are starting the tear down wed..

 

R

Ryan91Saleen

New Member

Apr 18, 2003

173

0

0

Washington

Apr 20, 2004

#6

• Apr 20, 2004

• #6

what do you think my HP will be at?

 

thumper460

Founding Member

Jul 24, 2000

3,022

2

56

Orange Park , Fl

Apr 20, 2004

#7

• Apr 20, 2004

• #7

The TFS1 needs a little more pressure... the 110 @ 1.800 seems a little light.... but working with the .510 lift and .030 for spring stack, and the 1.800 installed... you could stick a .060 shim in there and be real close to being right on the money!! cool??
saves buying a new set of springs...cool??

Just me..............................

Thumper

 

R

Ryan91Saleen

New Member

Apr 18, 2003

173

0

0

Washington

Apr 20, 2004

#8

• Apr 20, 2004

• #8

anything else i should know?