Will this clutch work?

bdazzgt

I had to jerk off the cable to get it to stop.

Dec 27, 2005

328

0

16

Springfield MO

Oct 22, 2006

#1

• Oct 22, 2006

• #1

My cousin has a clutch for 2001 GT, it is brand new and never installed. It is a Spec for sure possibaly stage 1 or 2. How do i tell if this will work for a 5.0 T-5, count splines measure size? It looks to have quite a few splines so i dont know if it will work. I measured it and it is 10.5 inches across. I had pictures but for some reason they wont upload, i will try and get them tomorrow. Thanks for the info.

 

bdazzgt

I had to jerk off the cable to get it to stop.

Dec 27, 2005

328

0

16

Springfield MO

Oct 22, 2006

#2

• Oct 22, 2006

• #2

It has 26 splines what does a T-5 have? Also if the splines are different could i switch out the inputshaft somehow.

 

M

mikemustang289

Member

Jan 12, 2006

224

0

16

mesa, az

Oct 23, 2006

#3

• Oct 23, 2006

• #3

T5's have 10 splines, I'm not positive, but from what I remember the TKO's and T56's are 26 spline. I would give Spec a call. My Centerforce was for a 26 spline and I shipped it to centerforce so they could change out the splines, cost me $40. Or you may be able to use the pressure plate and buy a new disk, that all depends on whether or not the flywheel is the same.

 

bdazzgt

I had to jerk off the cable to get it to stop.

Dec 27, 2005

328

0

16

Springfield MO

Oct 23, 2006

#4

• Oct 23, 2006

• #4

Will this bolt up to a 5.0 though it looks a lot bigger around then my stock one.

 

bdazzgt

I had to jerk off the cable to get it to stop.

Dec 27, 2005

328

0

16

Springfield MO

Oct 24, 2006

#5

• Oct 24, 2006

• #5

bump

 

bdazzgt

I had to jerk off the cable to get it to stop.

Dec 27, 2005

328

0

16

Springfield MO

Oct 26, 2006

#6

• Oct 26, 2006

• #6

ttt