will turbocoupe rotors or spindles fit a 91 4 cyl mustang coupe ?

[89lxcoupe]

hey guys i bought a 91 mustang coupe 4cyl and i want to put the turbocoupe disc brake 5 lug rear in it then convert the front to 5 lug and was wondering if the 5 lug rotors will direct swap or if the spindles will bolt up. Thanks

 

[2000xp8]

I know the lincoln rotors will work for 5 lug on normal 5.0 front spindles.
Never had a 4 banger so i wasn't sure if the spindles are the same.
But stock 5.0 spindles should be a dime a dozen.

 

[Chrome_Rust]

t-Coupe stuff is the same as 5.0 stuff.
If you dont want to go through the hassle of swapping spindles right now, you can use 84 ford ranger 2wd 4cyl front rotors on your 4cyl spindles. same rotor as what you have save for 5-lug.


wait.... the turbo coupe doesnt have 5-lug...
I have a turbo coupe rear in my car with ranger axles, 98 grand marqui discs. If you have any problems with that let me know...

 

[Mustang5L5]

You are aware turbo coupes are 4-lug right?

 

[chrisvande]

You can use the spindles but not the rotors. Turbo coupe rotors have an ABS ring on them. So your choices are to use a mustang 5.0 rotor or Lincoln Mark VII 5 lug rotor.

 

[Mustang5L5]

Mark 7's also have ABS rings, and they can be used. I ran the Mark 7 rotors with ABS stuff for a while before going to cobra brakes