Just like the title says...How do I adjust the windshield washers? The passenger side nozzle is shooting way over the roof of the car. It's kinds funny actually. I tried with a paper clip with no luck. I have an 04.
Windshield Washer Adjustment
- Thread starter flstang65
- Start date
2000fordstanggt
Member
i seem to have the exact opposite problem, im spraying towards the very bottom of the windshield, on the passenger side.
so +1 on wanting to know if any adjustments are possible
so +1 on wanting to know if any adjustments are possible
Hardtop68
Founding Member
Mine also sprays too high on the passenger side... The black plastic thing (cowl?) is deformed thus making the nozzle points higher than normal... I just wash at high speeds so the flow falls on the windshield... Cheers...
Nazaar33
Founding Member
+3
I used a paper clip to make sure there wasn't nothing clogging my nozzle(s). In order to adjust the nozzle, I gently pushed the nozzle in the direction I was trying to move it. A very slight adjustment of the nozzle makes a significant difference in where the stream comes out and hits.
Good luck...Mike
PS If there is a 'proper' way/method to adjusting these nozzles, I am not aware and would like to know.
I used a paper clip to make sure there wasn't nothing clogging my nozzle(s). In order to adjust the nozzle, I gently pushed the nozzle in the direction I was trying to move it. A very slight adjustment of the nozzle makes a significant difference in where the stream comes out and hits.
Good luck...Mike
PS If there is a 'proper' way/method to adjusting these nozzles, I am not aware and would like to know.
Mine spray the same hight, but different patterns.
The driver's side sprays in a fan pattern, the passenger side is a straight jet like someone peeing on my windshield.
The driver's side sprays in a fan pattern, the passenger side is a straight jet like someone peeing on my windshield.
