wiring harness

M

mcgsmacks89

New Member

Feb 23, 2011

18

0

0

Mar 21, 2011

#1

• Mar 21, 2011

• #1

i have a 93 2.3l mustang, a 5.0 engine and auto tran out of a 92 and a 87 5.0 donor car without the engine or the tran. my question is will the wiring harness from the 87 work with the 92 engine and tran? the 87 was origianaly a man tran. my master plan is to put the 92 5.0 into the 93 and use the 87 for parts

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Mar 21, 2011

#2

• Mar 21, 2011

• #2

You need an engine harness from a 92-93 v8 mustang. This will match your dash and headlamp harnesses and you shouldn have any issues.

 

M

mcgsmacks89

New Member

Feb 23, 2011

18

0

0

Mar 21, 2011

#3

• Mar 21, 2011

• #3

wat if i switch out the dash and headlamp harnesses as well? will it still work?

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Mar 21, 2011

#4

• Mar 21, 2011

• #4

My bad I read your post wrong, if you have all the 87 harnesses and the ecu it will all hook up to the 92 motor and tranny.

 

ID89GT

10 Year Member

May 26, 2008

1,659

18

49

Spokane Valley, WA

Mar 21, 2011

#5

• Mar 21, 2011

• #5

You could swap it all over, but keep in mind it will be a speed density setup. If you really wanted you could swap over the 87 body harness then pick up an 89 mass air harness and that would work as well