Just bought a steal of a LX (600 dollar runner) and I want to make it into my daily. The car I bought runs and all, but it definitely needs some work.
Ive replaced the TFI + PIP in the distributor. Replaced the Coolant Temp Sensor. Have a pretty good spark at coil and at the plug. The car will start after its been sitting for 30 mins or so and if I fiddle with the timing I can sometimes calm it down and get it to idle. I can drive it, but its pig rich and bucks when im off throttle cruising (Automatic). Most times I have to let it sit a bit before it will fire up again. I can crank it, but no start, even with the foot to the floor.
I want to pull the codes, but I have some wiring off in the interior. I jump the 2 nodes together and I get no blinking, just a solid light. Can someone give me a heads up on where these wires should be?
http://www.easyscreens.info/?v=1366
http://www.easyscreens.info/?v=1367
Anyone have any other ideas? I have fuel in the rail, the pump is priming with ignition, its just so damned rich. Im almost positive I need O2s, but I want to read the codes before I jump in any deeper.
Great forum btw! Ive found so much amazing information without ever needing to make a post.
Ive replaced the TFI + PIP in the distributor. Replaced the Coolant Temp Sensor. Have a pretty good spark at coil and at the plug. The car will start after its been sitting for 30 mins or so and if I fiddle with the timing I can sometimes calm it down and get it to idle. I can drive it, but its pig rich and bucks when im off throttle cruising (Automatic). Most times I have to let it sit a bit before it will fire up again. I can crank it, but no start, even with the foot to the floor.
I want to pull the codes, but I have some wiring off in the interior. I jump the 2 nodes together and I get no blinking, just a solid light. Can someone give me a heads up on where these wires should be?
http://www.easyscreens.info/?v=1366
http://www.easyscreens.info/?v=1367
Anyone have any other ideas? I have fuel in the rail, the pump is priming with ignition, its just so damned rich. Im almost positive I need O2s, but I want to read the codes before I jump in any deeper.
Great forum btw! Ive found so much amazing information without ever needing to make a post.