any body going to woodburn for the fri night drags
thinking about going to try out the new motor
but I need some race gas does woodburn sell unleaded race fuel. my compression is alittle higher than i thought about 11.3:1 did a comp. test and most cylinders were 215 so I want to do some runs then going to pull the motor and put on the other heads and solled roller cam
comp. should be around 10.2:1 with the large chamber headshope to be able to run on pump gas
thinking about going to try out the new motor
but I need some race gas does woodburn sell unleaded race fuel. my compression is alittle higher than i thought about 11.3:1 did a comp. test and most cylinders were 215 so I want to do some runs then going to pull the motor and put on the other heads and solled roller cam
comp. should be around 10.2:1 with the large chamber headshope to be able to run on pump gas