• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

worth the gain???

  • Thread starter Thread starter jimsstang91
  • Start date Start date Dec 11, 2005

jimsstang91

New Member
Dec 4, 2005
101
0
0
Dec 11, 2005
#1
  • Dec 11, 2005
  • #1
i have a 91 notch with the stage 1 tfs combo track heat. is it worth the time to put a soild roller cam in?? how much more power would i get.?? 4:10's 5spd
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Dec 11, 2005
#2
  • Dec 11, 2005
  • #2
You'd probably lose power until you got to around 6k, then the gain would be minimal.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Dec 11, 2005
#3
  • Dec 11, 2005
  • #3
IntenseBlue said:
You'd probably lose power until you got to around 6k, then the gain would be minimal.
Click to expand...

What???!!?!!? LOL

Anyway...

Its only worth it if your goals require it. You'll need a new valve train and lifters as well. I personally think your best bet is a good custom hyd roller but it depends what you wanna do. I would say with the hotter lobes of a solid cam, you'd see gains everywhere. But how much, no clue. Cam break in is different too.
 

jimsstang91

New Member
Dec 4, 2005
101
0
0
Dec 11, 2005
#4
  • Dec 11, 2005
  • #4
well it will be street driven 95%. but i was looking for a more radical cam then the trick flow cam. what would be the next best thing?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Dec 11, 2005
#5
  • Dec 11, 2005
  • #5
Next best thing would be an aggressive custom grind hyd roller with matching valve springs. Are you running stock pistons? If so, you will not be able to go super wild but you will be able to go big enough to run hard.

Hitech motorsports, flowtech induction and buddy rawls all design cams.
 
You must log in or register to reply here.

Similar threads

D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
522
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
492
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
447
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
713
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
154
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?