B blue71 New Member May 30, 2003 36 0 0 Eau Claire, Wisconsin Mar 19, 2004 #1 Mar 19, 2004 #1 anyone one know if a 70 torino rear end would fit in 71 mustang?
L Lswhat New Member Feb 9, 2004 126 0 0 Orlando Mar 19, 2004 #2 Mar 19, 2004 #2 im thinking the torinos have trailing arms not leaf springs
351LX Founding Member Jul 25, 2001 1,007 0 0 Regina, Saskatchewan Mar 19, 2004 #3 Mar 19, 2004 #3 I put some 31 spline axles from a 70 Torino into my 1973 Mustang nine inch rear and they were the same length.The housing had leaf springs but I never measured the spring pad locations to see if they were the same as the Mustang ones.
I put some 31 spline axles from a 70 Torino into my 1973 Mustang nine inch rear and they were the same length.The housing had leaf springs but I never measured the spring pad locations to see if they were the same as the Mustang ones.
D D.Hearne New Member Sep 29, 2000 11,730 6 0 south louisiana Mar 20, 2004 #4 Mar 20, 2004 #4 Not sure on the width, but I believe they're either close or the same width. They both had leaf springs.
Not sure on the width, but I believe they're either close or the same width. They both had leaf springs.
9 96 DOHC Cobra Founding Member Oct 14, 2001 542 0 16 Cerritos, CA Mar 20, 2004 #5 Mar 20, 2004 #5 The width is the same, but the spring pads are in the wrong location.