Would the Mach tubing/seal fit under a GT hood?

The Screwdriver · Oct 19, 2006

Anyone ever try to fit the Mach shaker plumbing under the stock GT hood? I'm not even sure that the shaker part that sticks up through the hood is separate from the black plastic tubing that routes down to the air filter. So I guess that's 2 questions. Does the tubing come separate? And will it fit under the stock GT hood?

Thanks,
Jim

Mustang5L5 · Oct 19, 2006

Nope, the GT hood is not tall enough

02bluegtstang · Oct 19, 2006

mustang5l5 that gurl in your icon is HOT haha

myponyrocks · Oct 19, 2006

the tubing (from air filter to ?) WILL fit under a stock GT hood, the Shaker scoop itself wont, but if you are trying to think of a way to make your GT scoop functional, Don't even bother.

BlackenedSVT · Oct 19, 2006

myponyrocks said:
the tubing (from air filter to ?) WILL fit under a stock GT hood, the Shaker scoop itself wont, but if you are trying to think of a way to make your GT scoop functional, Don't even bother.

There are 1 or two people on here who have successfully done that, with rain drains and all

It IS a project though

myponyrocks · Oct 19, 2006

SteedaGTJ22 said:
There are 1 or two people on here who have successfully done that, with rain drains and all

It IS a project though

All I've ever seen are the "Woe is me, water dammage" threads from attempts, never seen a succesful (longterm) build.

Mustang5L5 · Oct 19, 2006

If they could seal it off and use rain drains like the factory Mach 1 has, then i dont see a problem.

It's when you just cut a hole under the GT scoop and dump the water down onto the top of your engine.

If some manufacturer could make a system that would use the stock GT hood scoop, but cut a small hole, install a rubber sealed inlet with rain drains and create a ram-air setup that didn't leak water onto the engine...i would buy it.

I like the CDC shaker setups, but they are way too expensive plus i need to have a hood painted.

It's easier to bolt up the GT-style setup and them mods the GT hood by cutting a small hole and using a gril peice with the honeycomb drilled out.

CRZYHRSGT · Oct 19, 2006

Mustang5L5 said:
If they could seal it off and use rain drains like the factory Mach 1 has, then i dont see a problem.

It's when you just cut a hole under the GT scoop and dump the water down onto the top of your engine.

If some manufacturer could make a system that would use the stock GT hood scoop, but cut a small hole, install a rubber sealed inlet with rain drains and create a ram-air setup that didn't leak water onto the engine...i would buy it.

I like the CDC shaker setups, but they are way too expensive plus i need to have a hood painted.

It's easier to bolt up the GT-style setup and them mods the GT hood by cutting a small hole and using a gril peice with the honeycomb drilled out.

+1. By the time you get the shaker kit and get the hood painted you're already finiancially getting close to the point of saying "Screw it, I'll just keep saving and get a blower".

I've never understood why no one can come up with a setup kit that involves making our existing scoops functional. It just seems so marketable

The Screwdriver · Oct 20, 2006

Thanks for the replies. That's what I was thinking (connecting the tubing to a hole cut in the stock GT hood). I thought the mach tubing had water drains in them already. If they don't then yeah... I'd be asking for trouble with water damage.

Thanks,
Jim

myponyrocks · Oct 20, 2006

Yeah the Mach tube itselt doesn't have a drain, the drain is in the shaker seal and the shaker itself.

KarKraft used to make a kit that made the scoop functional some one was trying to get them to revive it a while back. I gave up waiting and have had the CDC shaker and now the KarKraft shaker on my car Yup coulda got a blower, but oh well.

Would the Mach tubing/seal fit under a GT hood?

The Screwdriver

New Member

Mustang5L5

That is…until I whipped out my Bissell

02bluegtstang

Banned

myponyrocks

I have more billet on the Stang than most women ha

BlackenedSVT

Active Member

myponyrocks

I have more billet on the Stang than most women ha

Mustang5L5

That is…until I whipped out my Bissell

CRZYHRSGT

New Member

The Screwdriver

New Member

myponyrocks

I have more billet on the Stang than most women ha

Similar threads

Would the Mach tubing/seal fit under a GT hood?

New Member

That is…until I whipped out my Bissell

Banned

I have more billet on the Stang than most women ha

Active Member

I have more billet on the Stang than most women ha

That is…until I whipped out my Bissell

New Member

New Member

I have more billet on the Stang than most women ha

Similar threads

Privacy & Transparency

Privacy & Transparency