bbarber275
New Member
- Jun 20, 2007
- 3
- 0
- 0
Wrecked hopes / Fond Memories
- Thread starter FastLane68
- Start date
1320stang
Founding Member
Happy Birthday to me 
I got your e-mail and I'm sorry I didn't reply.
I was pretty discouraged at the time and considering just giving up.
This summer I started work on it again although I didn't get a lot done.
The thumbnails are a couple of pics showing how the windshield pillers will go together.
The intention is to overlap all the body joints for strength.
I have acumulated many needed parts, some from you guys here, some I bought here and there and I have a donated 3/8" gas line from a fellow member of VMOC. (Vintage Mustang Owners assoc.)
I've picked up a couple of commercial sponsorships/offers of help.
Mike Maier of Maier Racing said he would help with the cage (if I ever get there), Spray Technology (Powder Coating) in Santa Clara primed the clip and some other stuff. (virtually anything I want, has the new wheels now)
I still haven't got my hands on a replacement tailshaft and tailshaft housing.
I had an offer of a replacement tranny but nothing ever happened and the guy disappeared from the web.
(not that anyone owes me anything, other than the oxygen thief that stole the car.)
I'm a little dubious about my ability to correctly align the front and rear clips so I'm looking for a GOOD shop in my local area to do the job.
Terry over at Davis Moters is ready to do the final welding after it's aligned.
Many thanks to everyone who donated parts to this beast.
Roy.
I got your e-mail and I'm sorry I didn't reply.
I was pretty discouraged at the time and considering just giving up.
This summer I started work on it again although I didn't get a lot done.
The thumbnails are a couple of pics showing how the windshield pillers will go together.
The intention is to overlap all the body joints for strength.
I have acumulated many needed parts, some from you guys here, some I bought here and there and I have a donated 3/8" gas line from a fellow member of VMOC. (Vintage Mustang Owners assoc.)
I've picked up a couple of commercial sponsorships/offers of help.
Mike Maier of Maier Racing said he would help with the cage (if I ever get there), Spray Technology (Powder Coating) in Santa Clara primed the clip and some other stuff. (virtually anything I want, has the new wheels now)
I still haven't got my hands on a replacement tailshaft and tailshaft housing.
I had an offer of a replacement tranny but nothing ever happened and the guy disappeared from the web.
(not that anyone owes me anything, other than the oxygen thief that stole the car.)
I'm a little dubious about my ability to correctly align the front and rear clips so I'm looking for a GOOD shop in my local area to do the job.
Terry over at Davis Moters is ready to do the final welding after it's aligned.
Many thanks to everyone who donated parts to this beast.
Roy.
Attachments
It is good to hear from you.
So, to clear up any confusion, it is NOT rebuilt. The rebuilding process looks to be here: Rebuild
and what we saw on your site was the original build (that was stolen/crashed).
Good luck on your build. I have 289 parts kicking around (all in need of work), so if you need something 289 related, I might be able to help (the original build was a 351, so I may not be helpful). I think your still in body work land though.
So, to clear up any confusion, it is NOT rebuilt. The rebuilding process looks to be here: Rebuild
and what we saw on your site was the original build (that was stolen/crashed).
Good luck on your build. I have 289 parts kicking around (all in need of work), so if you need something 289 related, I might be able to help (the original build was a 351, so I may not be helpful). I think your still in body work land though.
wild70stang
New Member
- Nov 11, 2005
- 317
- 0
- 0
Dam, coulda used this http://www.dynacornclassicbodies.com/ford_models.html if only it was available... But its great you fixed the body, hell of a nice job after an 
kind of incident.
kind of incident.sorry to hear that man . its sad to loose a car and have it come back jacked up . those people who stole the car should get cruel and unusual punishment .
I am in san jose also and i want to learn how to restore cars but never done it . i would love to help you out if you ever need some
help , but only on my days off .
I am in san jose also and i want to learn how to restore cars but never done it . i would love to help you out if you ever need some
help , but only on my days off .
Tubo(2-bo)
Member
Begs the question, "What ever happened to, San Leandro resident Deshon Julian Laimont, 24, And 22-year-old Oakland resident Alonzo Moore???"
You are correct.
Yep, I'm still in BodyWork land.
I am just about ready to do the last cuts before trying to align the front and rear.
I noted that in some early posts, there were some guys that were willing to lend a helping hand. (literally).
If any of you guys that live in the area have some time you can spare I would really appreciate the help.
There are many times where 1 guy really has to struggle to get something done that with two is a piece of cake.
Besides, as I've gotten older it's become harder and harder to push myself into actually getting of the stick and working on the car.
I could have finished this already if I had focused on it better.
Hey 408ponyman, that would be great. Anytime. PM me for my ph. #.
Roy.
Yep, I'm still in BodyWork land.
I am just about ready to do the last cuts before trying to align the front and rear.
I noted that in some early posts, there were some guys that were willing to lend a helping hand. (literally).
If any of you guys that live in the area have some time you can spare I would really appreciate the help.
There are many times where 1 guy really has to struggle to get something done that with two is a piece of cake.
Besides, as I've gotten older it's become harder and harder to push myself into actually getting of the stick and working on the car.
I could have finished this already if I had focused on it better.
Hey 408ponyman, that would be great. Anytime. PM me for my ph. #.
Roy.
jlangholzj
Mustang Master
...roy....your me hero! 
it's great to hear that your...slowly but surely....making progress. I know a guy with a 70 GTO that got smashed in after another idiot ran a stoplight hitting him at ~40 mph....they got that fixed too..
even better, your doing this yourself!
keep that old pony alive roy, don't put 'er down
-John
it's great to hear that your...slowly but surely....making progress. I know a guy with a 70 GTO that got smashed in after another idiot ran a stoplight hitting him at ~40 mph....they got that fixed too..
even better, your doing this yourself!
keep that old pony alive roy, don't put 'er down
-John
Thought I'd drop in and give you guys an update.Crashed Mustang
Hi Ron,
Thanks for the call, I really appreciate it.
I am working on getting it back together but it's a major major job!
I kind of glanced over the previous posts and I should clarify one thing. The harness did NOT fail. From the position of the belt it looked like it wasn't fastened. Whoever stole it failed to steal the cross-bar and shoulder harness anyway so the belt wouldn't have helped much.
Here is a link to the page I put up while building it, and one to my guestbook where you can read some details not in the article.
If anyone has parts laying around they can pass on, I'll be overjoyed.
As anyone who has seen any of the pics can testify, I have to replace the entire front of the car, about 50% actually. Suspension is totally trashed, only things left are the Springs and Konis. I'm going to have to rebuild the tranny, the tailshaft housing is broken and the tailshaft bent. Rear end seems ok.
I have managed to come up with a front clip but it's totally bare.
Here are a couple of pics, engine going in, and engine coming out.
My Son is giving my a hand getting it out.
I eventually passed the body and Interior to my nephew in Oregon but kept the engine.
Over the last Couple of years I refreshed the engine, new bearings rings gaskets and added aluminum accessory brackets etc.
I dropped it Into a 68 Cougar XR7 I've had for a long time.
For 20 years I drove a 1997 SVT Cobra but just sold it today so I'll be getting the Cougar off non-op and putting it on the road.
Here's the engine in the Cougar.
