• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

WTF is it

  • Thread starter Thread starter FEARED
  • Start date Start date May 25, 2005

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 25, 2005
#1
  • May 25, 2005
  • #1
Ok. ANOTHER problem. My ride is currently having a problem idling at the right rpm. Allow me to explain. If I even attempt to drive the car without at least a 10 min warmup the idle will drop to 500-300 rpm during a normal stop and during a quick stop it stalls. When the car is fully stopped the rpms will climb back up to around 700rpm. Once the car is warm its pretty steady at 700rpm which is still about 200-300 rpms lower than my previous 2001 GT. I know this isnt normal, but I'm not sure of the cause. My initial thought was vacuum or possibly a brake booster as it only occurs during braking. However, my old 5.0 had a brake booster that was leaking so badly it sounded like an unhappy snake was trapped under the dash and it never had any problem idling or dropping rpms during a stop. So, WTF is it?
 
B

BLUE03GT

New Member
Jul 13, 2003
281
0
0
Sunnyvale, Ca.
May 25, 2005
#2
  • May 25, 2005
  • #2
i can assure you 1 thing... NO ONE KNOWS

Ford should be shot for this problem... take it to Ford and all you will hear is... we dont know.. we can try this and that... etc etc...
 

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 25, 2005
#3
  • May 25, 2005
  • #3
All I know is this is ! My ride has only 34k on it and the damn thing is a hazard on the rode. If I'm in a panic stop and the car dies I'm screwed! I'm not to interested in replacing the IAC because I know other folks have had no luck with that replacement. If anyone has ANYTHING on this PLEASE lend me a hand.
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
May 25, 2005
#4
  • May 25, 2005
  • #4
IAC(idle air control) solenoid.
 

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 25, 2005
#5
  • May 25, 2005
  • #5
bdcardinal said:
IAC(idle air control) solenoid.
Click to expand...
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
May 25, 2005
#6
  • May 25, 2005
  • #6
go to the dealer and tell them you need in IAC for your stang. it shoudl cost you between $40 and $70 depending on how much they sell it to you for. 2 bolts and some carb spray to clean out the passages.
 

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 25, 2005
#7
  • May 25, 2005
  • #7
bdcardinal said:
go to the dealer and tell them you need in IAC for your stang. it shoudl cost you between $40 and $70 depending on how much they sell it to you for. 2 bolts and some carb spray to clean out the passages.
Click to expand...

I understand what you are saying. I suppose I will remove it and clean it out, but as I stated before I've seen a number of posts from other members that have replaced the IAC with no resolution. I'll post here again after I tackle the cleaning over the weekend or sometime this week. If the problem persists I'll go ahead and replace it and let you guys know wtf happens. BTW, you guys with normal idles are typically around 900 are you not?

Thanks,
-Me
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
May 25, 2005
#8
  • May 25, 2005
  • #8
FEARED said:
I understand what you are saying. I suppose I will remove it and clean it out, but as I stated before I've seen a number of posts from other members that have replaced the IAC with no resolution. I'll post here again after I tackle the cleaning over the weekend or sometime this week. If the problem persists I'll go ahead and replace it and let you guys know wtf happens. BTW, you guys with normal idles are typically around 900 are you not?

Thanks,
-Me
Click to expand...
mine idles at 750.
 

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 25, 2005
#9
  • May 25, 2005
  • #9
bdcardinal said:
mine idles at 750.
Click to expand...

I recall my 01GT idling around 900 and by looking at Spreadman's 4.10 vidz it looks like he's running around 900 as well. 750 seems a bit low to me.
 

Superhereaux

chicks make me feel inadequate
Founding Member
Jul 30, 2002
538
3
59
South Texas
May 25, 2005
#10
  • May 25, 2005
  • #10
my car's around 7-800rpm ('o2), so is my brothers 'o1 gt
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
May 25, 2005
#11
  • May 25, 2005
  • #11
bdcardinal said:
IAC(idle air control) solenoid.
Click to expand...

 

FEARED

...but won't that hurt you?
Apr 1, 2005
29
0
0
Valley of The Sun
May 26, 2005
#12
  • May 26, 2005
  • #12
Superhereaux said:
my car's around 7-800rpm ('o2), so is my brothers 'o1 gt
Click to expand...

I guess if mine would STAY in that range i'd be happy with that but 300 is not cool.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
610
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
680
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
530
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
316
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
844
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?