• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

yep, another 3G question...

  • Thread starter Thread starter chrishicks
  • Start date Start date May 28, 2005

chrishicks

New Member
Apr 30, 2005
58
0
0
May 28, 2005
#1
  • May 28, 2005
  • #1
ok, I was just given this alternator. it is a 95A. it is a brand new not remanufactured unit. it was purchased back in 97. the guy was cleaning out his basement and just came across it. he no longer has the vehicle so he just gave it to me. I actually recieved 3 pieces.

1) the alt.
2) pulley brand new in box - motorcraft box
3) regulator and holder - motorcraft box

now to my questions:

1) is it really worth doing the upgrade if I only go from the stock 75A to a new 95A? I never noticed any charging problems with my stock unit but it is the original piece from 1988.

2) the pulley is I'm guessing 2 7/8" in size. would this around the correct size for this application?

3) on the alt. there is this very small plug about 0.5" away from the regulator plug. do I need to get something for this?

thanks for any help you can provide.
 

chrishicks

New Member
Apr 30, 2005
58
0
0
May 28, 2005
#2
  • May 28, 2005
  • #2
ok, I took a few pics of the alt. it isn't the cleanest piece but according to guy it has never been installed on anything. it even has a plastic cap where the pulley goes as you can see in the pics. I haven't installed the regulator yet because I don't want to even bother if I won't be able to use it. here are the pics:






I hope these are ok to see. one thing I do notice is that the threaded hole is smaller than the current alt. so that have have to be enlarged.
 

Attachments

  • DSCF0130.webp
    25.1 KB · Views: 102
  • DSCF0131.webp
    28.7 KB · Views: 100
  • DSCF0132.webp
    32.9 KB · Views: 111
  • DSCF0133.webp
    30.4 KB · Views: 103

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
May 28, 2005
#3
  • May 28, 2005
  • #3
I would sell it honestly. If you do the upgrade you might as well get a 130amp atleast. If you plan on upgrading the stereo, head lights or pulleys....you'll just be upgrade again with that alternator. If you have no desire to do any of the upgrades I just mentioned then it "might" be worth it.



Fred
 

chrishicks

New Member
Apr 30, 2005
58
0
0
May 28, 2005
#4
  • May 28, 2005
  • #4
thanks for the reply.

I actually have an aftermarket cd head unit with a 1000W Kenwood amp pushing 2 12" subs. I can crank it up pretty loud to the fact of the entire car turning into one giant rattle and my alt. only drops a tiny bit at idle. the real draw to the charging system is when I am driving at night with headlights, fogs, and the A/C on and blasting the stereo. then it drops. I rarely drive the car at night though(too many crazy drivers come out at night here)

I was mainly wondering if this would work since all I would have to pick up is a new 4G wire and the 3G alt. adapter plug right now. I was thinking of something as a temporary(a year or so) upgrade until I get other things done. but if this wouldn't really be worth the hassle I think I'll just postpone something else and just go with a full alt. upgrade.
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
May 28, 2005
#5
  • May 28, 2005
  • #5
You could just go ahead and get everything for the 130amp install and just install a smaller fuse to run the 95A. I would suggest running maybe a 90amp or 85amp fuse. This way you aren't exactly doing the work twice, plus it will help out when you do decide to drive it at night .




Fred
 

Stang8URMPRT

Active Member
Dec 28, 2003
1,100
1
38
Daytona Beach, FL
May 29, 2005
#6
  • May 29, 2005
  • #6
I'd sell it and buy a 3G 130 amp kit. You can get one on Ebay from Alterstart with a lifetime warranty.. like 140 shipped, 150 AMP, all the hardware, connectors, stator connector... everything. They also offer the 4 gauge alt cable with fuse for 25 bucks. It's what I bought and would highly recommened them.
 
You must log in or register to reply here.

Similar threads

M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
277
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
564
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
424
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
285
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Electrical Innovate PSB-1 is DOA? Am I an idiot? All plausable. Please Help
  • Dontknowchit
  • Apr 26, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
389
Fox 5.0 Mustang Tech Apr 26, 2025
Dontknowchit
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?