Yet another HELP ME THREAD

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 25, 2006

#1

• Jan 25, 2006

• #1

Yet another HELP ME THREAD PROJECTOR HELP

I just bought a set of projector headlights off of ebay View attachment 489860
problem is the paper work says you connect the black line to the negative electrode of the park/signal/side marker and connect the red line to the posistive electrode of the park/signal/side marker lamp.

each light wire harness has 2x Red 1x Black and 1x White on each harness.
obviously the two red go to + and black to - but, do I assume white goes to - ? the seller hasnt emailed me back.

 

91LX_5L

Founding Member

May 13, 2002

1,943

0

36

British Columbia

Jan 25, 2006

#2

• Jan 25, 2006

• #2

well the 9007 harnesses only have two wires so im not sure what you would do there doesnt make much sence to me?

 

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 25, 2006

#3

• Jan 25, 2006

• #3

two circles one that plugs directly in to original OEM light harness other contains 4 wires in question.

 

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 26, 2006

#4

• Jan 26, 2006

• #4

TTT
back to 1st page someone here has installed them

 

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 28, 2006

#5

• Jan 28, 2006

• #5

thanks for all the help.... not

Anyways the red/black wire is for the halo ring.
The red/white is for left white small bulb. white is ground as ive answered my own question.

 

red ink

Founding Member

Apr 8, 2002

746

1

0

Arizona

Jan 28, 2006

#6

• Jan 28, 2006

• #6

those arent like anything i've seen before...looks shweeet man.

 

loudpedal99

New Member

Aug 30, 2005

160

0

0

ND

Jan 28, 2006

#7

• Jan 28, 2006

• #7

How did they fit?? I've read that some people have problems with the fitment. . .

 

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 29, 2006

#8

• Jan 29, 2006

• #8

loudpedal99 said:

How did they fit?? I've read that some people have problems with the fitment. . .

Click to expand...

the fitment suxs at first using the supplied hardware doesnt work well. However I removed the plastic push pins and replaced them with nuts and washers now they fit like a glove its totally beyond me why they supplied those OEM push clips they just can suck enough.

They fit great now I wired the halo ring and inner small light to a new fog light switch i added where the coin holder used to be now I have two fog light switches next to each other that are OEM inside the car.
The real headlights and maker lights are all on the factory harnesses and work just as before...
LOOKS bad ass around dusk just driving around with the halo rings on

 

03REDFIRE

New Member

Apr 3, 2004

252

0

0

LOST

Jan 29, 2006

#9

• Jan 29, 2006

• #9

BTW anyone know how to make your fog lights come on without the headlights how can it be easily modded?