• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Yet Another Starter Problem

  • Thread starter Thread starter Steve491
  • Start date Start date Jul 19, 2008

Steve491

Member
Apr 20, 2008
254
2
19
Charlotte, NC
Jul 19, 2008
#1
  • Jul 19, 2008
  • #1
Hi,
I have a 97 Cobra and the starter has been intermittent. The battery is good, I replaced the positive and negative battery terminals and made sure the ground cable to the block was good. The ignition switch is good, the anti-theft is good, clutch switch is good, and power is getting to the small relay in the distribution box every time the key is turned. I haven't gotten to the starter/solenoid under the car yet.

My question is this: What have others with this same problem had to replace? Is it most likely the solenoid, starter, positive battery cable, or small relay? Just curious, need input.

Thanks in advance for replies, Steve
 

cobradude

New Member
Sep 24, 2007
16
0
0
Maryland
Jul 20, 2008
#2
  • Jul 20, 2008
  • #2
When it does not start, do you hear a click, no sound, multiple clicks? When it does start, does it crank normally or slow? Give us a little more info and maybe we can help.
 

Steve491

Member
Apr 20, 2008
254
2
19
Charlotte, NC
Jul 21, 2008
#3
  • Jul 21, 2008
  • #3
Hey Cobradude, Thanks for the reply. When is does NOT start all I hear is the relay on the fender click. There isn't a peep out of the solenoid which is mounted on the starter below. I checked the trigger wire from the relay and it's good, signal is getting to the solenoid. It has to be either the solenoid, a bad connection on the starter, or a bad connection going to the starter. Battery is good, terminals up top are good, and all ground cables are good.
I think it's an intermittent solenoid, but if that starter comes off to replace a solenoid a brand new starter is going back on too.
Car has almost 120K miles and although the starter looks clean it also looks original.
 

cobradude

New Member
Sep 24, 2007
16
0
0
Maryland
Jul 21, 2008
#4
  • Jul 21, 2008
  • #4
Sounds like a new starter is the best idea. Not only could the solenoid be bad, but the armature could have a dead spot also. Good Luck!
 

ID89GT

10 Year Member
May 26, 2008
1,659
18
49
Spokane Valley, WA
Jul 22, 2008
#5
  • Jul 22, 2008
  • #5
Why not try jumping the solenoid, then you'll know for sure
 
S

shoobs99svt

Member
Jul 31, 2006
90
0
6
Charlotte NC
Jul 30, 2008
#6
  • Jul 30, 2008
  • #6
I think that im having the same problem with mine... real intermittent though in fact hasnt done this again for a week or so. Left it at Harrelson Ford for 5 days straight and it didnt happen even once... so they couldnt diagnose. Anyways only response I got on here was to replace the starter:

http://forums.stangnet.com/748629-starting-issues.html

hey where in charlotte do you live?
 

Steve491

Member
Apr 20, 2008
254
2
19
Charlotte, NC
Aug 2, 2008
#7
  • Aug 2, 2008
  • #7
shoobs99svt,

It's so damn frustrating to diagnose these intermittent problems but I believe it's an internal starter/solenoid issue. I've checked everything, replaced the battery terminals, and cleaned every connection yet once a week (at the worst time) she won't crank. The starter relay clicks, signal is getting to the solenoid but no solenoid click. I have a rebuilt starter/solenoid sitting on the bench but just haven't had time to install it, not to mention it's starting every time now.

I live in NW Charlotte, Coulwood area off hwy 16. Send me a picture of your Cobra. How do like the 4.30 gears? I still have the factory 3.27s and they need to go.
 
S

shoobs99svt

Member
Jul 31, 2006
90
0
6
Charlotte NC
Aug 3, 2008
#8
  • Aug 3, 2008
  • #8
Yeah my guess is swapping starters is the way to go... like i said it sat at the dealer$hip for 5 days and didnt do it once. As of now its been starting every time. Mech there said next step would be to change it and go from there. either way glad (or not so glad) to hear that someone else is having the same problem and im not the ONLY one.

As far as the 4.30s go I just got it back from install this morning. Had subframe connectors and springs/shocks/struts done at the same time so still feeling the whole package out. So far in first gear having trouble hooking up, might need to upgrade/stiffen IRS? Second and third pull a whole lot harder, and fourth now (NOT third) for passing on freeway. Might have lost some time to pass because of this... Revs a whole lot more on freeway of course, need to get speedo dialed in before I can figure mph/rev... maybe 2900 at 80 mph? All together pretty happy though, definately not for freeway miles if you commute a lot... im curious about the gas mileage.

These are a few pics that I found from when I first bought it in AZ, still a stocker and the prev owner got a little crazy with the stickers:
<a href="http://s53.photobucket.com/albums/g51/shubinj/?action=view&current=Hwy89A4.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g51/shubinj/Hwy89A4.jpg" border="0" alt="Photobucket"></a>
<a href="http://s53.photobucket.com/albums/g51/shubinj/?action=view&current=Hwy89A3.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g51/shubinj/Hwy89A3.jpg" border="0" alt="Photobucket"></a>
 

Steve491

Member
Apr 20, 2008
254
2
19
Charlotte, NC
Aug 3, 2008
#9
  • Aug 3, 2008
  • #9
Looks Very nice and Very stock in those pictures. It even has the pony in the grill.
Where did you get the gears installed? I would love to do it myself but I just don't have the time or patients to do it, not mention I'll probably throw out my back in the process.
My suspension is already done except the bearings need replaced on the CC plates. $12 each, just need to do it.
My Cobra doesn't have IRS. It has the good ole solid axle. Pros and cons either way.

Lets see some recent pictures.
 
S

shoobs99svt

Member
Jul 31, 2006
90
0
6
Charlotte NC
Aug 3, 2008
#10
  • Aug 3, 2008
  • #10
That was a little too stock... first thing that I swapped was the pony in the grill.

I had Dale at Custom Performance do the work... he's right behind Lowe's speedway. Their website is www.gofastfords.com. I havent had the chance to work with them before but read a lot of good reviews on this and some other forums. Dale is also the owner, he was real knowledgable on mustangs and straight forward as far as what it would take to get the work done. They were a little hard to get a hold of at times, and the job took a day extra... but apparently this was because of some "iffy" carrier bearings he found that ended up being replaced. Better to have the job done right than fast... charged $360 labor and $30 lube/shims. The extra bearings were $60 install and $115 Ford parts. He seemed to do honest work will go back there for the next mod.

Right after 2000 GT headlights:
<a href="http://s53.photobucket.com/albums/g51/shubinj/?action=view&current=HPIM0262.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g51/shubinj/HPIM0262.jpg" border="0" alt="Photobucket"></a>
Today after the 1" / 1.25" drop:
<a href="http://s53.photobucket.com/albums/g51/shubinj/?action=view&current=HPIM0289.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g51/shubinj/HPIM0289.jpg" border="0" alt="Photobucket"></a>
<a href="http://s53.photobucket.com/albums/g51/shubinj/?action=view&current=HPIM0288.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g51/shubinj/HPIM0288.jpg" border="0" alt="Photobucket"></a>
Send some back over
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Aug 4, 2008
#11
  • Aug 4, 2008
  • #11
Posted via Mobile Device i would say loose or dirty connection.starters go bad alot and is cheap and easy repair
 
You must log in or register to reply here.

Similar threads

M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
158
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
F
Alternator Not Charging
  • Fri Guy
  • Aug 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
444
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 31, 2025
AeroCoupe
R
93 LX 2.3 Trouble codes 53, 85, 21 help
  • Rickshaw302
  • Apr 15, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
17
Views
652
2.3L (N/A & Turbo) Tech Apr 18, 2025
AeroCoupe
S
Crank no start, I’m stumped!
  • Seth Brogan
  • May 18, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- May 14, 2026
BossHorseGirl
B
J
2000 Ford Mustang GT No Crank No Start please help
  • Jowen216
  • Jun 5, 2024
  • SN95 4.6L Mustang Tech
Replies
7
Views
3K
SN95 4.6L Mustang Tech Jul 5, 2024
Jowen216
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?