New pics after a detailing

[blacksheep06]

Do you mean how much would I charge? .. or how much would it cost you to do it yourself? I just charged a guy $250 for a 03 Cobra which was low for what I ended up doing to it. It took me a good 18 hours to do it. I did EVERYTHING including undercarriage, wheel wells, I'm talking about everything. The guy came to pick it up and couldn't believe his eyes and left $500 lighter.

Yea, I'm talking about someone like yourself and I would want some kind of swirl mark treatment mainly.

 

[NotQuik]

car looks great kooldawg You've come a long ways with her

 

[NastyStang113]

Yea, I'm talking about someone like yourself and I would want some kind of swirl mark treatment mainly.

Where do you live?

 

[blacksheep06]

Where do you live?

North Georgia

 

[steedman07]

A real detail would consist of a very good wash, claying, paint corrective polishes until it fixed it which is usually a few different steps in itself, a Iso. Alcohol wipe down which will remove any polishes that are hiding the defects to show you the paint. Than onto a sealant and/or glaze, and than topped with a wax.

I just had mine done..10 hours of work, and its never looked better...I wouldn't even think about using a high speed wheel on my car, I leave that for the proffesionals..

Kooldawg, It looks good..but +1 on claying it..

 

[NastyStang113]

North Georgia

A little too far for myself. I'll try to find someone that is capable of quality work.

 

[autumn_again]

kooldawg, do you know how much the 340s weigh?

i've been in love with those rims since i first saw them. i'm thinking of ordering 2 strictly for a track tire, and then 4 for all around driving. if weight isn't MUCH over stock i'd be looking at ordering a set the 31st of this month.

 

[kooldawg6]

kooldawg, do you know how much the 340s weigh?

i've been in love with those rims since i first saw them. i'm thinking of ordering 2 strictly for a track tire, and then 4 for all around driving. if weight isn't MUCH over stock i'd be looking at ordering a set the 31st of this month.

I weighed the OEM fanblade with the 235/50-18 and the 340 with the 245/45-18 was only a couple of pounds more. I didn't bother weighing the 18x10s with the 295/45. The MTs are similar enough size to OEM for me to weigh them on the fanblades to the Nittos on the 340s. I can do that tomorrow evening and get back to you.

 

[autumn_again]

alright thanks. they are a killer looking wheel. i've had 3 sets of bullitts including this car, i'm wanting something different, and nothing really gets at me like those wheels. i like ccw, but i dont like the price. haha.

 

[kooldawg6]

kooldawg, do you know how much the 340s weigh?

i've been in love with those rims since i first saw them. i'm thinking of ordering 2 strictly for a track tire, and then 4 for all around driving. if weight isn't MUCH over stock i'd be looking at ordering a set the 31st of this month.

Here are the weights of the tires/wheels.
MT ET Street.....265/40-18 on 18x8.5 Fanblade..................53.4 lbs
Nitto NT555......245/45-18 on 18x8.5 Rev Wheel 340SC.....51.8 lbs
Nitto NT555......295/45-18 on 18x10 Rev Wheel 340SC......56.6 lbs

 

[02GTRX]

Awesome pics! where did you get the mustang lettering for the back?

 

[stanmckinney]

I have the Mustang lettering too. Look on E-bay. They are available in stick on. Many good Ford parts vendors have them too.

 

[kooldawg6]

I got the letters from CJ Ponyparts. They are Scott Drake with double sided tape.

 

[dmaxstang]

If you buff a little harder you might be able to get that dude out of your finish that keep showing up in some of your pics. But really, that looks great

 

[kooldawg6]

If you buff a little harder you might be able to get that dude out of your finish that keep showing up in some of your pics. But really, that looks great

I believe he was hiding under the surface and I exposed him

Thanks