- Dec 19, 2010
- 5,721
- 4,244
- 224
Put my brackets on and had to redo some of the pre turbo pipe, but it's all 100% done now. Next up is the down pipe, FINALLY.
Awwwwriiigghhhtttt!
Build Thread The Hoopty Chronicles - New House, New garage, New Car?
- Thread starter hoopty5.0
- Start date
Awwwwriiigghhhtttt!
Routing isn't going as planned. Sway bar effed up my strategy. Under we go! This should work just fine, not much lower than the oil pan and certainly not lower than the headers were before
And yes, I know about the shroud. Going with electric fans that are more compact
Dual contour fans . Mine will be in hopefully this week . They are super compact and fit the radiator perfectly .
Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
mikestang63
SN Certified Technician
I meant to be outside working on the car all day today, but my wife and I got absolutely fried in the sun yesterday, so we've been laying on the couch like cooked lobsters all day.
I'm kinda at a standstill any way. I don't have the right size V band for the downpipe. Currently, I have a 3.5" on there which works ok for mock up, but I need a 3" to secure it properly. The tough part will be getting a 3" V band on 3.5" tubing. Fun, fun.
Once I do that, I can make mounts for it and secure it permanently. I have a bunch of assembly I can work on in the meantime, still need a distributor and a clutch. I'm sure more will pop up too.
I'm kinda at a standstill any way. I don't have the right size V band for the downpipe. Currently, I have a 3.5" on there which works ok for mock up, but I need a 3" to secure it properly. The tough part will be getting a 3" V band on 3.5" tubing. Fun, fun.
Once I do that, I can make mounts for it and secure it permanently. I have a bunch of assembly I can work on in the meantime, still need a distributor and a clutch. I'm sure more will pop up too.
Last edited:
Never had mishimotos . I have there rad . I have the black magic extreme right now
Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
mikestang63
SN Certified Technician
I paid $50 for it at the LKQ last week. You can have it for that + shipping. Comes with both factory connectors which are $15 each. . Painted it SEM trim black. It has a crack on the top right of the shroud that does not impact the fans
Attachments
Why not do cop now? Edis8 module couple coil packs harness from jy magnetic pickup and tooth wheel. Do it now while your still in mockup
A distributor is $30 at Rock Auto. I'm gonna have a whole slew of issues to iron out and don't wanna mess with DIS yet. It will happen though.
not exactly sure what you are lookign for.
I used the 825 Precision Intercooler, in on passenger side out on drivers side.
take a look thru this mess if that is not helpful
http://s631.photobucket.com/user/groverd/library/93 GT?sort=3&page=1
I used the 825 Precision Intercooler, in on passenger side out on drivers side.
take a look thru this mess if that is not helpful
http://s631.photobucket.com/user/groverd/library/93 GT?sort=3&page=1
Thanks!not exactly sure what you are lookign for.
I used the 825 Precision Intercooler, in on passenger side out on drivers side.
take a look thru this mess if that is not helpful
http://s631.photobucket.com/user/groverd/library/93 GT?sort=3&page=1
So, when it's not raining down there, I guess you're running around naked in the noon day sun?I meant to be outside working on the car all day today, but my wife and I got absolutely fried in the sun yesterday, so we've been laying on the couch like cooked lobsters all day.
I'm kinda at a standstill any way. I don't have the right size V band for the downpipe. Currently, I have a 3.5" on there which works ok for mock up, but I need a 3" to secure it properly. The tough part will be getting a 3" V band on 3.5" tubing. Fun, fun.
Once I do that, I can make mounts for it and secure it permanently. I have a bunch of assembly I can work on in the meantime, still need a distributor and a clutch. I'm sure more will pop up too.
What a beautiful engine bay man, holy smoke!not exactly sure what you are lookign for.
I used the 825 Precision Intercooler, in on passenger side out on drivers side.
take a look thru this mess if that is not helpful
http://s631.photobucket.com/user/groverd/library/93 GT?sort=3&page=1
Ohh crap,....I can't see the picture.. it's covered in a sticky mess.....What tha....Who the hell has been wankin to pics of Grover's Engine bay?....not exactly sure what you are lookign for.
I used the 825 Precision Intercooler, in on passenger side out on drivers side.
take a look thru this mess if that is not helpful
http://s631.photobucket.com/user/groverd/library/93 GT?sort=3&page=1
You bunch of shine-**** fiends,.........
Similar threads
