Explorer intake vacuum port

[JD1964]

On a 1996 Explorer intake there’s a vacuum fitting where coolant passes through. What is the purpose of coolant passing through this vacuum fitting? Does the coolant temperature open/close the vacuum supply and if so at what temperature is it open or closed?

 

[Noobz347]

It flows all the time. There's no open or close.

You don't need the thing. It's supposed help get things above freezing for cold starts. Most people eliminate it.

 

[JD1964]

It flows all the time. There's no open or close.

You don't need the thing. It's supposed help get things above freezing for cold starts. Most people eliminate it.

Are you talking about the coolant lines at the throttle body?

 

[Noobz347]

Are you talking about the coolant lines at the throttle body?

Same thing, different arrangement.

 

[JD1964]

Same thing, different arrangement.

I just want to make sure that if the coolant lines are not connected here that the vacuum supply won’t get cut off.

 

[Noobz347]

I just want to make sure that if the coolant lines are not connected here that the vacuum supply won’t get cut off.

Do you have a hand-pump and plugs?

If not, corner parts store just to verify.