Search results

  1. 9

    Bellhousing torque specs

    Im in the middle of replacing the TOB in my mustang and was wondering what to torque the tranny to belhousing bolts to. Its a TKO 600 and the mcleod blowproof, if that matters.
  2. 9

    351W Swap Header Questions

    So im planning on doing the 351W swap in the near future, and I have a few questions about headers. My current setup: With the 5.0 I have clearance issues with the TKO-600 and the Mcleod Blowproof housing, using the BBK Longtubes. It barely fits and I have to loosen one side to get the...
  3. 9

    Faster 5.0

    Has anyone done any business with them? Im looking at possibly buying a 351W crate engine from them, and was just curious if anyone has had any experience with them. I found it on ebay a while ago, but the auction ended, so i looked them up on the web. The website is...
  4. 9

    Throw out bearing/clutch adjustment

    My Throw out bearing is making a bad chirping sound when the clutch is out... If i barely rest my foot on the clutch pedal(without pushing it in) the chirping goes away. I went under the car to check the adjustment of the clutch cable and it is all the way tightened, yet there is still quite a...
  5. 9

    Both Door Handles Broke.

    So both my door handles are still physicalliy there, but it feels like there is nothing attached to them. Door still opens fine from the inside. So do I just have to buy replacement exterior door handles?
  6. 9

    Will These Wheels Fit?

    My 1991 LX 5.0 was converted to a 5 lug setup by the previous owner. I want to buy some new wheels. The ones I am looking at are for a "94 to 2005 mustang" They are 5 lug. Will they fit?
  7. 9

    What sensor on 02 wiring harness?

    What is the sensor that is on the oil pan that is connected to the same wiring as the O2 sensors? Reason im asking is cause when i went to re-hook up the 02 sensors after the long tube header install i realized that it was broken off.
  8. 9

    Few Weird Drivetrain Noises?!?!

    Ok... just installed the TKO 600 on an AOD car... at idle in neutral there is a low rattling/vibration that goes away when i push the clutch in. Is this normal? Clutch fork or TOB? Next weird noise is a high pitched very faint random chirping that occurs in all gears, and also seems to go...
  9. 9

    AOD to TKO swap car wont start

    So we got the bellhousing and new headers in and the old shifter is out of the car. Before we took the shifter and stuff out the car started fine with the new pedal assembly in. The car will start if i jump the solenoid. Any ideas? Is it just a bad solenoid or is there something we...
  10. 9

    McLeod Bellhousing "L" Bracket

    What the heck is an L bracket? and what does it do? Do I actually need one because the instructions that came with my Mcleod lead me to believe that i need one. It says it mounts inside the bellhousing? Are they referring to the clutch fork as an L bracket?
  11. 9

    Input Shaft

    My TKO 600 just showed up today and in the pre installation tips it says that i should be able to turn the input shaft by hand. How difficult should it be to turn the input shaft? Should it spin fairly easy? I have to use a lot of strength to get it to move. and i cant seem to get it to make a...
  12. 9

    Steering Column Wire(where does it go)

    Ok so im in the process of a AOD to 5-speed conversion and just recently got the pedal assembly in... and today I was going to put the steering column back in the car. I plugged everything in that i could see(to the steering column), and there are still two plugs dangling down there. One...
  13. 9

    TKO 600 and Mcleod Bellhousing

    Ok so I just ordered the Mcleod Blowproof bellhousing for the TK0600 which is on the way. I read somewhere that i have to drill out some of the holes? Does anyone here know about that?
  14. 9

    How do i attach the clutch cable...

    to the pedal assembly? Im in the process of an AOD to TKO 600 swap. I bought the BBK Quadrant and Firewall Adjuster... I dont like the quadrant because you basically have to hammer it into place on the pedal assembly. It doesnt come with spacers to hold it in the right position, so they made...
  15. 9

    TKO swap in progress... Steering Column?

    SO i removed the bolts and the wires and the steering column is dropped... but now what? does it just hang there while i finish the pedal assembly swap? It doesnt seem right...
  16. 9

    TKO 600 Questions

    Ok.. so if i want the best of both worlds... (acceleration and decent cruising capabilites) Would the TK0 600 with the .82 5th gear ratio be my best bet? And going with the TK0 600 would give me the advantage of having the 26 spline setup which is superior to the 10 spline... (they do make a...
  17. 9

    AOD to TK0 500 questions.

    So ive decided that im going to go through with the AOD to TKO 500 swap. I need to buy the 31 spline driveshaft yoke to go with the TK0. Is the stock driveshaft going to work with this? Will the TK0 bolt up to a stock T-5 Bellhousing? And will the stock crossmember work? I found...
  18. 9

    AOD Problems

    Ok... so I have a 1991 Mustang LX 5.0 with an AOD tranny. When I place the shifter in drive, the engine will rev freely until it hits about 2,000 rpms... then it will either slam into gear or slip into gear. Once its in gear it shifts fine... Except for coming from OD to Drive. In order...
  19. 9

    Car wont start(or even try to)

    when i turn the key to on i hear the fuel pump and the normal lights and stuff come on as well as the radio and all other electronic equipment. When i turn the key to start absolutely nothing happens except for it cuts the power to the radio and stuff which is normal. There is no noise from...
  20. 9

    Is this the Head Gasket?

    So i just bought another mustang... 1991 5.0 hatchback AOD... In the upper RPM range it pings and sputters a little... my mom said that it blew a puff of white smoke out the exhaust when i got on it... the guy i bought it from said that he put cheap gas in it so that it just needed to be...
Top Bottom
Back
Forums
Menu