Search results

  1. T

    Supercoupe Tranny

    Just wondering if anybody knows if a 91 t-bird supercoupe manual will swap into the place of my 87 5.0 T-5. We put a turbocoupe trans in my friends fox and it worked great, but im not sure if the supercoupes are different, thanks.
  2. T

    Weird electrical problem

    When I start my car alot of the time my power windows and electric trunk release don't work. I shut the car off and restart it then they work. Does anybody know what can cause this, Thanks.
  3. T

    What diff gears?

    Just wondering what would be the best ratio gears to get. I have a non-lockup AOD with a 2800 stall. I was thinking 4.10's but i've had people tell me 3.73's and 4.30's, so im not sure. Any help appreciated
  4. T

    Head torque

    I just got a set of AFR 165 heads with the ARP 7/16 head bolts. Just wondering what I should torque these to. I was just going to do 80ftlbs on top bolts and 70 on bottom, but my someone said since im using arp bolts I should do 82ftlbs on top and 80 bottom. Any help appreciated.
  5. T

    Will 1.7 rockers work

    Im doing a build up on the stock shortblock and just got a set of new tfs 1.7 3/8 stud rockers for free from a friend. I was wondering if there is a chance that I can use these instead of the 1.6's I was going to get. I was told that I most likely would not have enough piston to valve clearence...
  6. T

    AFR 165 and 185 difference

    Just wondering if there are any differences between the 165's and 185's, besides the 2.02 intake valve? Can a 2.02 valve be put in the 165? Some one told me that the 185's have more growing room 165's, is this true?
  7. T

    AFR 185's on stock short block.

    Im in the market for a set of heads and found some AFR 185's with 61cc chambers for a killer deal. My problem is I have always heard that the pistons have to be clearenced with the 2.02 valve except with the Trickflows . Today I had two seperate people tell me they would work with a lower lift...
  8. T

    This combo seem good?

    Hows this combo? Im about ready to order what I need for my H/C/I swap. Just wondering how this combo would work, and if Im forgetting anything on my list. typhoon intake 70 mm throttle body / egr tfs twisted wedge heads head bolts tfs stage 1 cam tfs pushrods 6.700" long tfs 1.6...
  9. T

    Won't idle after new motor mounts.

    I put new motor mounts in my gt and now it won't idle. It's smoking black and sounds like its not fireing on all cylinders. I pulled a couple of plugs and they had gas on them. I did move the wires around to the 02 sensors, can this be the cause. Any help appreciated.
  10. T

    Twisted Wedge vs Performer

    Just wondering if anyone knows which is better, the trickflow twisted wedge head or the edelbrock performer head, thanks.
  11. T

    Cam with stock heads

    Just wondering if it's ok to put a cam in a motor with stock heads and springs. I was thinking of getting an intake and maybe the trickflow stage 1 cam. How will this work. :shrug:
  12. T

    Cam with stock heads

    edited, already posted.
  13. T

    TFS track heat head questions

    I want to get a set of trickflow track heat heads for my 91 notch and i dont know to much about them. I noticed that i can get them o-ringed or without o-ring. what does that mean? Also it has the 2.02 valve and a set of edlebrock heads with the 2.02 valve requires the pistons to be notched. I...
Top Bottom
Back
Forums
Menu