Search results

  1. B

    desktop dyno on new motor ?

    ok so i did a desktop dyno on my motor that i am building for my car and i have a question for you guys. ok heres what i got max power = 318 max torque = 391 this is measured at the flywheel but my question is with a pa aode, 2500 stall, and 3.73s how much of that can i expect to put to...
  2. B

    cobra intake gain??

    i was wondering if someone could tell me how much gain i can expect going with a 94 cobra intake over the stock gt intake. thanks in advance
  3. B

    anyone running a pa aode?

    i was wondering if anyone here is running a performance automatic aode. the PMA-PA45101-50 is the one i am looking at on summitracing.com . i have been looking at them and was wondering if anyone has had any problems with them. i was looking at lentech too but i just can't afford a lentech. my...
  4. B

    horrible gas milage

    i just figured up my gas milage for the city and it is horrible and i need to figure out why. for the city i figured it to be 10.5 miles to the gallon and it seems to be running really rich. when installing my exhaust i pulled the #1 plugs and it was all wet and smelled like gas. i have no check...
  5. B

    aftermarket gauge question

    i know this maybe a stupid question but i was wondering if there is a way to hook up a electric water temp and oil pressure gauge and still have your stock gauges working as well. to see how different they are and how far the stock gauges are off at times. thanks in advance for your replys
  6. B

    hughes torque converters

    has anyone had any experience with these torque converters? i was looking at them on summits website. can you guys give me some feedback
  7. B

    aode flexplate

    i was wondering if a aod flexplate is the same as an aode flexplate cause i am needing to get one but i wanna make sure i get the right thing. thanks in advance for your help
  8. B

    cam timing

    On a 5.0 I'm building, I have a Cloyes timing chain set with the indexable crank sprocket. I know that if you set it in the 4 advanced position, it will run harder coming out of the hole, but my question is what if anything will this affect on the computer? Or should I just run it straight up?
  9. B

    anti knock sensor????

    i was wondering if our 94/5 cars are equipped with this sensor cause i am trying to figure out if i need to get a block with the hole for it. thanks in advance for your help
  10. B

    crane 2031 vs steeda #19

    i am looking at these 2 cams to put in my car. i was wondering if you guys could give me some input on which one to go with. its going to be a dd and week end racer. thanks in advance
  11. B

    head question

    can someone tell me the differences between a e5 and a e7 head? combustion chamber and valve size difference if any. i also need to know if they are ok to use on my 95gt. thanks in advance
  12. B

    e7 1.7 roller rocker question

    i was wondering what all i will need to put 93 cobra 1.7 rockers on a set of stock e7 heads? i know i will need shims but is there anything else i will need to do this? input greatly appreciated
  13. B

    running very rich please help

    so i have been noticing that my car has been smelling like it has been running rich but yesterday i pull one of the plugs out just to check that and even the spark plug smelled like gas...like really strong. what can i do to make it not run so rich...as this is what is probably killing my gas...
  14. B

    so i installed my exhaust today

    like the title says...i put in shortys, off road h and cat back today in my garage...i am now wishing i would have paid the $250 to let someone else do it. 95 exhaust swaps suck ass. took me from 9am to 530pm to get it done ...it was a bitch ..and i still can't get one of the tip correct. the...
  15. B

    granatelli maf sensor

    is anyone here running one of these maf. i was looking at getting one of them but wondering about the quality. i know that most people go with pro-m's but i am looking for one that will bolt up to my mac cai. as far as i can find anyway. please if you have one give me some input
  16. B

    how much gain with p&p e7's

    i am running stock intake and cam but i am going with a cobra intake and steeda #19 later on. will have fms shortys 2.5 mac exhaust all the way back. how much rwhp/torque can i expect to gain with a set of highly p&p e7 heads with 93 cobra 1.7 roller rockers? also will the pushrod length be the...
  17. B

    o2 sensor question

    so i am about to put on an aftermarket exhaust. the h pipe has spots for o2 sensors but it only has one on each side. on 95 gt's they have 2 sensors on each side. can you just run 2 sensors and not have any problems? and how would it effect my gas milage in doing so? thanks in advance
  18. B

    anyone have pic of 3" tips?

    i was wondering if anyone has pics of their 94/95 with 3" inch exhaust tips? personally i think tips that big would look stupid on our cars but just wanted to see a pic first. thats all mac carries anymore so i wanted to see before ordering. thanks in advance
  19. B

    cam/rocker question

    i am planning on running a steeda #19 cam and a set of 93 cobra 1.7 roller rockers. my question is ... will my stock pushrods work and are the stock valve covers on a 95 tall enough to clear the 1.7's? thanks in advance for the help
  20. B

    67 shelby power steering cooler

    original 67 shelby p/s cooler- reconditioned to include stripped and repainted correct color,fins straightened, flushed and pressure tested. ready to install. $110 shipping included in u.s.
Top Bottom
Back
Forums
Menu