Search results

  1. R

    94 gt motor

    have a complete longblock from a 1994 GT. Its a 5.0 and it runs strong with under 95K on it. I am selling the block thats all assembled, heads that are still assembled, roller lifters, cam, oil pan and pump (roughly 500 miles on them)selling this for 500 obo i also have a automatic 94- 95...
  2. R

    eating gas

    hey my girl drive a 95 v6 convert.and the thing just eats gas like its a big block. it will eat the whole tank in 170 miles and she drives like a old person. I have a K&N air filter in it thinking it was a clogged filter but that didn't help much. Iam looking for any suggestions on what it could...
  3. R

    oil pressure

    hey, i have a 86 mustang with a 5.0 that i rebuilt and the oil pressure is dropping. Here is the situation, when i start the car up the oil pressure is sitting in the middle of the gauge and over a twinty min. period it lowers down to low. Iam trying to figure out wether or not if i should get a...
  4. R

    car stalls out

    hey i just got back my 86 5.0 back from the shop and when i put it in gear the car dies out. I have the E303 cam with 1.7 roller rockers in it. I did the iac bypass to bring the idle up and it helped with making the car more stable at idle but as soon as i put it in gear the rpms drop and then...
  5. R

    surgung idle

    hey i just got my car up and runing its a 1986 mustang 5.0. I went to pick it up and the guy says it has surging idle and when it sits and warms up its a litle high. He said it because of the iac valve is from a 90 mass air car. I put in a E303 cam with 1.7 rockers. IS the surging idle from my...
  6. R

    paint code

    hey i wanted to ask around and see if you guys knew the paint code to the new saleens or where i could if it. Iam working on painting my car that color and need the code. thanks
  7. R

    brakes

    hey, i got a 1986 mustang gt that iam completely redoing and making it better in little ways. I have a tubular front k member with a arms and i got 87 spindles off ebay. My question is are the calipers and bracket from the 86 going to bolt up with the 87 spindles and iam getting the 87 brake rotors.
  8. R

    susupension

    hey iam looking inot upgrading my front suspension and looking at going to a tubular front end with coilovers. I was wondering do i have to do a caster camber plates at first or can i make it by with stock plates for a month or two? The car is a 86 5.0 gt.
  9. R

    custom back window (PICS)

    hey i got some picture of the hatch i got off a guy with it installed in the hatch i have it right now but not installed on my car so i thought to give the people wanting to see it a chance to do so. Iam going to bend in the custom fiberglass peice with the hatch and make it look like one. The...
  10. R

    "sport back hatch"

    Hey everyone i have been looking for anyone else with the sport back hatch peice. This is the peice that replaces the rear window in the hatch its fiberglass. I know they were 799 brand new and now the company stop making them. I wanted to see if anyone had pictures of it or have it.
  11. R

    E303

    Hey guys iam about to wrap up my rebuild/ build up. I got a E303 cam this pass week and wanted to make sure the E303 will work with the 1.7 roller rockers i got. The springs are already upgraded also. And one more question is when i put the E303 cam in do i have to degree it?
  12. R

    wrist pin removal

    hey i need to remove the wrist pin on one of my pistons and wanted to see how you guys do it. I have searched around but only to find different things. I don't know if i need a specailty tool for this or what. All the advise i can get helps. the pistons are out of a 87 5.0 mustang
  13. R

    Rebulding for the first time

    Hey everyone. I have slowly been working on a 5.0 motor on putting it together. IT is a 86 5.0 block and crank. the rods a pistons are 87, and the heads also. I put in all new bearing and i was puting the bottom end together and notice its pretty tough the turn the motor with the wrench at the...
  14. R

    transmission questions

    hey, when it comes to transmisions its a world that iam not to sure on. Iam building up a mild 5.0 with a possible turbo later and want to make my aod some what tricked out. iam ordering the hammer shifter from B&M and was wondering should i get a shift kit? and/or a new valve body? Also which...
  15. R

    rebuilding

    hey iam in the process of rebuilding my 86 5.0 ho efi motor.I know about the crappy pistons and heads so i ordered the forged pistons off a 89 that are the trw ones. Iam ordering the e7te heads that have crane valve springs and 1.72 roller rockers on them. Iam going to port out the heads also...
  16. R

    question about a 4.6

    hey, I have a question about the LINCOLN MARK VIII 1995 with the 4.6 dohc. I got a 1986 with a 5.0 that blew on me and i wanted to see how hard it would be to put it in my car, the guy is selling the whole car for pretty cheap. I know it sounds werid but i would love to do something different...
  17. R

    rims

    a guy is selling 17X9 Inch wheels 6 1/2 Inch Off Set with a 5X 4 1/2 Bolt Pattern. I know i would have to do a five lug convversion on my stang to put them on but i was wondering will they fit and if they will need a spacer. I have a 1986 mustang gt hatchback
  18. R

    what happened?!?

    hey i purchased a 86 gt 5.0 mustang a couple of weeks ago and now starting on geting it going. It ran alright when i got it but i found out to much oil was in the motor and i drain it out and now its at the proper amount. The motor now doesn't want to turn over. The starter engages but can't...
  19. R

    smoking

    alirght iam a new proud owner of a 1986 mustang gt with t tops. I have msd 6a ingintion box and blaster coil. I put new wires in and i still got a miss fire. The other day i had to reseal the valve covers and put in a new throttle body gasket. I started it up and it ran for 3 mins with white...
  20. R

    CarFax anoyne have it?

    hey i was wondering if any one had a subscribition to carfaxs.com. Iam trying to look up information on a mustang that has ben sitting for along time and no owner insight. so if you do let me know it would be a big help since iam trying to get a good mustang to build up. Thanks
Top Bottom
Back
Forums
Menu