Search results

  1. aleborjas

    Cam for a 408 N/A

    hi, i'm looking for a off the shelf cam MECHANICAL ROLLER for a 408 10.5 c.r , RHS alum heads 215, victor JR intake, 950 holley hp carb, 1 3/4 headers 3" exhaust, 3500 stall, C4 trans, 4.10 gear, 28" slick, the car weight 2970 pounds with driver...
  2. aleborjas

    Best cam for SD ecu

    hi, i'm building a 87 mustang GT speed density (no mass air) stock short block E7 heads ported with bigger valves 1.94 intake and 1.55 exhaust, 10.3 cr , explorer intake, 2.5 complete catback, manual trans, 3.73 gear, 1.6 rockers... What cam can i use? of the shelf...
  3. aleborjas

    Wideband

    hi, which is a good wideband meter? i like FAST but i don't know if its good i want it digital and possible RPM input!
  4. aleborjas

    Best power adder for 07'

    hi, my cousin is about to buy something to boost his engine he has forged pistons and rods he want to get around 600 HP to the wheel i'm looking for at least 14 pounds of boost but i cant decide centrifugal (intercooled), roots (intercooled) or Turbo kit i've heard good things on Procharger...
  5. aleborjas

    wideband

    hi, which is a good wideband meter? i like FAST but i don't know if its good i want it digital and posible RPM input!:nice:
  6. aleborjas

    fuel pump for juiced 2007

    hi, which fuel pump can i use to upgrade the stock one? (not Shelby kit, no budget for that) just to replace the pump only i'm using ZEX 175 shot of nitrous on a stock 2007 and i keep blowing the plugs beacuse i'm leaning out in fourth gear (on th wide band i see A/F through all rpm range in...
  7. aleborjas

    15 inch for 2007

    hi, what store sales 15 inch wheels for 2007 stang gt only for drag to put the slicks on it i'd tried weld's but does not fit beacause they hit the brakes!
  8. aleborjas

    347 Strip Cam

    hi, i have a 347 engine with AFR 185's heads, Arround 10.5 CR, 5 speed, 30 pounds injectors, RPM Intake, 70mm TB, 1 3/4 LT's, i'm looking for of the shelf cams i had Comp cams XE274HR but i was told that i'm leaving power on the table so i sold it know i want something much better without...
  9. aleborjas

    15" or 16" wheels for a 07'

    hi, i want to buy 2 wheels to put slicks on it only for the track but the problem is the offset on those cars and i dont know if i can put 15" because of the caliper, i know 16" works! wich company makes cheap racing wheels for those cars? i looked at centerline and weld racing and they make...
  10. aleborjas

    Aluminum driveshaft???

    hi, i need to know who makes aluminum driveshaft for a 2000 mustang with T56 trans i know is a littlebit shorter than the stock one because i hade to cut the stock one and it was perfect but i took the car to the track and launch it 5000 RPM's and the driveshaft exploted looks like a screw...
  11. aleborjas

    best subframe conectors?

    hi, i need a good subframes and i want the best ones for drag racing and where i can get them EX: ebay or some store and what brand:nice:
  12. aleborjas

    CAI 2007

    wich is the best cold air intake for N/A 07' i care about performance
  13. aleborjas

    custom cams for a 347

    hi, wich company or who makes the better custom cams? i have 347 with AFR 185's, 10.5:1, performer RPM intake, 30 pound injectors, 70mm TB, 1 3/4 LT's headers, 3.90 gears, T5, i whant to spin arround 6500 RPM's and leave my A/C and all powers working what is the best cam can i use making power...
  14. aleborjas

    grounds

    hi, i want to know where do the 2000 mustang gt uses all the grounds because i have an electrical problem because the odometer numbers gets bright dark etc but the mayor problem is when i hit the pedal the car sometimes (almost always) just turns off(makes like a pop sound before it gets off)...
  15. aleborjas

    Best bolt on's for a 07' manual

    hi i want to go mid 12's i already have predator, 3.73 gears, lontube headers, no cats x pipe, borla catback the next thing i want to buy is CAI i dont know wich is the best one (producing more power) and pulleys what else can i do?
  16. aleborjas

    393 600HP?

    hi, i would like to build a 393 (i have the short block) but i want to make over 600HP N/A with pump gas is that possible? or what is most hp's can i make with pump gas what heads, CR, camshaft (i know custom but which is the best one making custom cams for stroker? ), intake, carb, headers etc....
  17. aleborjas

    351 block

    hi, i want to know how much HP and torque a 351 block can support stroked to 408 with good studs and main caps and which is the best one and how can i diff.. one from an other?:shrug:
  18. aleborjas

    2000 mustang unknown codes

    hi, there is a stang that is geting me off is a 2000 car with 5.0 stroker kit, vortech supercharger(15 pounds), aftercooler, 42 pounds injectors, aeromotive fuel system (rails,regulator,lines), dual pumps, lightning maff, p-51 intake, 278 comp cam's, LT headers, 3" mac catback, diablo custom...
  19. aleborjas

    Twin turbos for a 98 GT

    hi, i'm about to buy twin turbo for a friends car the car has forged pistons and rods and whe already changed heads and intake whe put 2001 mustang heads and cams and whe put adjustable cam gears and whe retard both cams 2 degrees i whant to put 15 pounds of boost the kit comes with 42 pound...
  20. aleborjas

    best intake for my combo

    hi, now i'm building my new 347 with forged I beams and forged pistons in my sig is the rest, the thing is i whant to know what CR with 93oct fuel N/A and what intake. Please lots of inputs! P.S About how many HP's should this engine have? flyweel and tire
Top Bottom
Back
Forums
Menu