Search results

  1. Big Jay

    Power Steering Leak

    I have beat the piss out of the search engines looking for some solutions. Here is what I'm dealing with. 95 Cobra, the fitting that goes into the power steering pump is fine. It is the fitting on the hose that goes into the this fitting that is leaking. Now I know there are 2 possible...
  2. Big Jay

    Heads, cam, turbo and LOTS of other stuff for sale.

    AFR205 Heads. 2.08 IN. 1.6 EX. BBC beehive springs. Set up for .600" lift Hyd. roller. $1250 TFS-R phenolic spacer 1". 2 gaskets and bolts included $25 T56 shifter. UPR Blue Thunder. Handle included. Has adjustable stops. I will include a Hurst Aluminum knob too. $100...
  3. Big Jay

    Been awhile...

    since I have posted here. I went to the track last night and gave it a spin. Best of the evening was a 10.9 @ 145.0. 1/8th mile was 110. I did turn it up a bit more and ran 117 in the eighth but it blew the discharge pipe at 1000'. The 145 run was made at 13psi.
  4. Big Jay

    Closer

    Finally getting closer to being back on the road. All I have left is to assemble the 4L80E auto, wire it into the AEM, mount and run the trans. cooler, and have the DS built.
  5. Big Jay

    Wanted- '94-'98 Auto Shifter

    I am putting a Auto in my car and am looking for the stock shifter, besel, cable ect. If any of you have done a 5 spd swap now would be a good time to lose some junk. [email protected]
  6. Big Jay

    Sick

    I am looking into a auto tranny for my car. I want a overdrive with lock-up. No problem right? Did I mention the car is making 1200hp? So I found one. A 4L80E with all the goods, trans brake, remains fully auto, AEM will control shift points, lockup, kick down ect... Here's the kicker. $8000...
  7. Big Jay

    My MM&FF feature.

    I scanned my magazine article...
  8. Big Jay

    Just finished building...

    My 88mm single turbo kit. Here are some crappy pictures. http://i7.photobucket.com/albums/y269/Big_Jay_D/88mmkit013.jpg http://i7.photobucket.com/albums/y269/Big_Jay_D/88mmkit012.jpg http://i7.photobucket.com/albums/y269/Big_Jay_D/88mmkit011.jpg...
  9. Big Jay

    Summmm bitch.

    Ford does not make a 94/95 alternator/air pump bracket anymore. If any of you blower guys have a bracket that I can have/buy that would be great. I know that those rip-off yards probably have one but I would rather start here for some help. I will be glad to pay for shipping if one of you would...
  10. Big Jay

    Finally!

    Well it finally happened. After one and a half years they finally did it. In this month's Muscle Mustangs & Fast Fords Magazine I got my very own feature. As the article reads I won the feature as part of the award for the Muscle Mustangs & Fast Fords Editor’s Choice Award. They did a good...
  11. Big Jay

    Mad power

    Ran the car last night. Had traction issues. I ran a best 11.2 @ 142. 98mph in the eighth. 44mph pick up on the big. Too bad I almosted looped it at 130 later in the night. Might have been a good pass. Also ran a 11.4 @ 138. This was at 10psi. :D
  12. Big Jay

    Pictures of my car...

    I know some of you have been asking for awile. Finally got off my ass and found a host site.
  13. Big Jay

    My car on 17" Drag Radials *VIDEO*

    I have video of my car at the track but I need someone to host it. Any help?
  14. Big Jay

    Big Wheel DR speeds.

    So what would you consider a "fast" mph would be on 16",17",18" drag radial tires??? I ran in a DR class this weekend. No 15" tires allowed.
  15. Big Jay

    Getting there.

    The fast Tucson cars were out together tonight. No one ran but it was still fun. My car is a bit squirrelly in the top of third. I don't blame anyone that might not have wanted to run after seeing the car loose like it was (on 28x12.50 ET Streets). Fourth seemed ok but I have a little miss...
  16. Big Jay

    Went back to the dyno.

    4.5psi=580 7psi=600+ 9psi=700+ 12psi=800 15psi=875 20psi=925+ Made over 900. Next stop, the track. :D
  17. Big Jay

    Put the car on the dyno.

    It made 560 @ 4psi. 605 @ 4 psi and 8 degrees more timing. 700+ at 10psi. 865 @ 14psi. The IC pipe blew off right at that point. I was targeting 15psi. The pipe came off at 6000rpm so with another pound of boost and 700 more rpms I think that 900 should be expected. Next time on the dyno...
  18. Big Jay

    91mm @ 6psi

    So the new turbo set works well. 11.3 @ 132.7 at 6psi of boost. Need to work on the short game. Then I can retake the throne!
  19. Big Jay

    Picture of the DIY turbo kit.

    I just got this done. It was home built. It's a garrett diesel turbo. http://www.starshadow.com/~gael/pictures/littleanthonys/jay4.JPG
  20. Big Jay

    Crazy Video

    This is Steve Cole of Tucson, Az. at the turbomustangs.com shootout in San Antonio. He was ok and nothing on the car was hurt. http://www.turbomustangs.com/car_images/videos/texas04/stevesave.wmv
Top Bottom
Back
Forums
Menu