Search results

  1. lptheory96

    Completely Clear Tail Lights with Red LED bulbs?

    I really don't want the ugly ricey euros on my 04 GT, But I found these cool RED LED bulbs that I can use in place of my standard bulbs in the rear...They fit just like OEM. So, I was thinking it would look really cool to have the red plastic be completely clear since the bulbs put off red light...
  2. lptheory96

    Original 1990 LX(Same as GT) Hood

    Had it for years in the shed after I replaced with Cowl. Trying to sell for Best Offer. (So make me one!) No major dents or dings that I am aware of.
  3. lptheory96

    Does My Xpipe Install Sound Right?

    Help Please... Need your ear! :vids:Made A Video a ride around the block with my new Xpipe install connected to 2 chamber flows. To me it sounds like there is too much of a Higher Pitched WHA WHA WHA WHA or popping like farting sound while cruising. Revving sounds great though... I thought it...
  4. lptheory96

    MIL eliminators Question

    Do you HAVE to have an Oxygen Sensor plugged into the other end of the MIL eliminators in order for them to work or will they still simulate the correct data? I really do not want to have to buy a new sensor just to bypass it. (Original Sensor Stolen) Right now I got the sensor plugged with a...
  5. lptheory96

    O/R Xpipe | What to put in O2 Sensor hole? HELP!

    :shrug: Quick Background Story: Passenger side Cat got stolen along with one O2 Sensor. Im Replacing whole exhaust with Off Road Xpipe. (no Cats) The Off Road Pipe still has o2 sensor slots (holes) despite the fact every use's MIL Eliminators. I have an emply hole ( or slot) where the...
  6. lptheory96

    Xpipe install - Manifold nut!!!!! AUGH!!!!

    So Im trying to install my xpipe which seems simple. IF I CAN GET THE OTHER DAMNED OEM PIPE OFF. Anyway, ODDLY ENOUGH, I got the passenger side nuts off relatively easy with a lot of WD40, And swivel Joint, Extensions, , and 5/8 deep well. The 5/8 seemed a tad big but it worked..... After...
  7. lptheory96

    X-pipe Installation question, Please assist

    Getting a Jegs Xpipe shipped today. Im about to go out and try to remove the old hpipe and cats... What all tools do I need, and more specifically what size nuts? I noticed the header bolts look larger than the ones toward the back.. does anyone know what Size sockets I will need? Also...
  8. lptheory96

    Tried "Rolling Crank" in wrong gear, major issues! Please Help!

    Please read this and help me diagnose what I screwed up. ANY thought would be appreciated. My Car: 2004 Mustang GT 4.6L What Had Happened Was: Car Battery Died, So as I ALWAYS do with MANUAL transmission I decided to do a rolling crank. (Where you drop the clutch while the car is...
  9. lptheory96

    Please Help-Inner Tire Rod End Installation!

    Hey Guys, got a 2004 GT, Alignment place wants me to get pass side inner tie rod end replaced before alignment and they wanted several hundred to do so. So I want to do it myself... Someone told me I would need some special tool or something, I am just really confused....My Guide book says...
  10. lptheory96

    2004 Clutch Question

    I need a new clutch kit for the 04 GT. Any Suguestions? Also I have the T-45 tranny right? What other years are compatible with mine? I saw some :taco:ch kits that say 99-04 and some that say 01-04. Thanks
  11. lptheory96

    50k miles, vlaves raddleing?! HELP!

    Yeah, sometimes when I first crank or I hit teh gas at a low RPM, I hear somethign that sounds like a woodpecker in my car, it has recently did it more foten and if I hit it hard as soon as it gets over 4k it does it until 5 1/2 K. Its gotta be my valves raddleing right? Why woudl this happen so...
  12. lptheory96

    Low Fuel Light - Fuel Reserve

    :bang: Doh.... So Im at work right now... That in itself is amazing.. why? I left my card at home and just drove about 30miles sience the "LOW FUEL" light came on.... I'll proballye nd up haveign to rob a crackhead down here or get some $$ wired.. but eitherway out of curiosity... TECH Q...
  13. lptheory96

    '04 gt already knocking?

    I have an 04 40th ann. gt, about 40k on it, I may have been a little latye on a few oil changes but when I first crank the veh. It knocks for like 1.2seconds then stops, I think its the rods knocking but it only does it when I first crank it, im wondering if im not just hearing something else...
  14. lptheory96

    Off/Road -VS- High/Flow

    The Story: I got my 2-chamber flows put on today with my stcok h-pipe... well... Im very dissapointed. It's sooooo quite, You can hear a little more aggressiveness at maby a 35% increase in volume. So I HAVE to get rid of my cats or get some high flow ones. The Question: O/R h-pipes (x-pipes...
  15. lptheory96

    What are These Rims worth?

    These are my stock 16" rims, there nice to me, but I want something bigger, and Im a real freak for chrome, iv seen these style in chrome but im really wanting come like cobra-R's or soemthing, my issue is I wanted to know What I could sell these for, so I know how much I have to spend on new...
  16. lptheory96

    N2O for daily Driver?

    :SNSign: Earlyer during another post I was asked if I plan to stick with n/a, Besides s/c I was thinking about n20.... How safe are the kits you buy these days on your engine, and to what rateing are they safe? 100-150??? How much does the adverage bottle cost to refill? can todays kits...
  17. lptheory96

    3.90 gears???

    I saw on partshopper.com a set of 5.0 brand 3.90 gears, Been thinkin gof gearing down my 2004 GT 40th ann.... 3.73 seemed too high for the money, 4.10 seems like it'd be too steep (my old 90 5.0 lx had trouble drving on interstate, (it was auto) [After the od burned out it was useless]...
  18. lptheory96

    Flowmaster offset question

    Im looking for a good place to buy 40 series flows for my 04 stang, it is stock and I plan to have them welded on. What inlet/outlet offset sicze do i need for stock pipes, or does it even matter being they will be welded on? I thik choices are 2.25, 2.50, 3.00?? And also, Anyone know...
  19. lptheory96

    Flowmaster w/stock h-pipe (?)

    :SNSign: Question: Is there any issue with just goign to my performance store SECO, buying 2 flowmaster mufflers for a 'stang, get them welded on liek I did on my older stang and keeping stock hpipe with stock cats... Besides the fact it's a ghetto made catback? How does it sound with flows...
  20. lptheory96

    '04 pulley install q?

    [THIS IS ALL FOR MY NEW 2004 GT btw] I got a set up MAc underdrive pulleys from v8power.com (looks as pictured) on site. Anwyay, The waterpump pulley almost touched the dampener pulley at the bottom, not teh part of the dampener i will replace, the otehr part that is smooth without a place...
Top Bottom
Back
Forums
Menu