Search results

  1. GONDO79

    90s roller engine going in my 64 mustang

    What's up stangnet. So today is the day I put my roller in the stang. 1990 mustang lx 302 motor bored 40 over, trickflow stage 2 cam 542/563, ported/polished e7 heads w 2.02/160 vavles. Oh ok heres my question. I'm still running a stock suspension. Manual steering. Would i have to use a...
  2. GONDO79

    Water from cowl

    Everytime I was my car or it rains I get water inside. I know it's coming in from the cowl.. Any suggestions how to fix this would really help Thanks.
  3. GONDO79

    Building a 347 stroker, any suggestions??

    Any videos would help.
  4. GONDO79

    I need wheel alignment specs

    Anyone have the wheel alignment specs for a 1965 stang? stock v8 manual steering
  5. GONDO79

    Removing 1964 steering gear box

    I was having a some play in the steering wheel so i decided to take it out and get it rebuilt.So I started to remove the gear box out of by car but ran into some issues. I removed my headman header and the pitman arm, the column nut and slid the column out after removing the turn signal...
  6. GONDO79

    1964 1/2 Mustang with no radio,wiring or speakers. where do i start???

    Like the title says i have a 1964 1/2 mustang that had no radio, wiring, nor speakers when i purchased it. I dont know much about it besided the visible butchering job done to fit a modern radio. =/ I was just wondering if some of u guys knew where i could start? main power source? source...
  7. GONDO79

    Trying to install a aftermarket radio..

    Im trying to install a radio in my 1964 after a year of hearing the motor roar on the freeways and streets!:D:D:nice: So now im trying to install a pioneer stereo and some 6x9 in the rear. I have kinda an idea on how to install it but i would like to do it once and do it right.. Where can...
  8. GONDO79

    Parking light wont light up

    Ok so the rear tail lights on my '64 coupe wont light up except went I apply the brakes. I've replaced -tail light harness -engine feed harness -brake switch -head lamp switch.:fuss: -fuses in fuse box -
  9. GONDO79

    ANY WESTSIDE CRUISES? SUNDAYS? EVENTS?

    I live in Culver City and was wondering where and when and if anyone is cruising any stangs up the coast or hanging out at any IN AND OUT,HOME DEPOT OR LIKE I SAID JUST A SUNDAY CRUISE. I usually drive around culver city,la,santa monica, and venice. someone anyone :flag::nice::SNSign::Track:
  10. GONDO79

    1964 rear brake light issue

    Im having an issue of my rear stop lights not working. The turn signals work but NOT when i apply the brakes. I've changed out the rear light wiring harness and the headlight switch.:mad: I've upgraded the single master cylinder to a DUAL M/C and Ive added a proportioning valve. Originally...
  11. GONDO79

    Electrical issue..flashing headlight

    Any good suggestions or suspicions why my headlight flash? I checked for a bad ground last night up front and rear and nothing. I cleaned up the ground conection points just in case and wire wheeled the screws. The lights almost flash as if it were attached to a flasher(like an emergency or...
  12. GONDO79

    MUSTANG CRUISE SPOTS OR SHOWS

    Where are all the muscle car/classic cruise spots or shows at? I live in INGLEWOOD, CA and I wanted to cruise wit a few other stangs or classics. I know about the one at tha home depot on tuesdays on century. :SNSign: I need to break in the cam and other parts before I :Track: :D...
  13. GONDO79

    I need my rear fenders rolled.Does anyone have a fender roller?

    Im located in Inglewood,ca. Please let me know if Anyone knows a shop or if you have the actually professional roller.
  14. GONDO79

    Leaf spring question..

    Is the tension of the leaf springs from a 1964 V6 greater or equal to some 1966 gt spings? My situation is that the car was orginally a v6 and was convertered to a v8. When the rear end was swapped out I used the v6 leaf springs. Now I've put on some 17x8 torque thrust and Im rubbing when I...
  15. GONDO79

    Any suggestions on a roller motor build?

    I just got my hands on a 87 mustang roller motor. Ive been read up how u can get a up to 400HP. I plan to use it 40%street 60%strip. i still want to be able to cruise it on cruise night. I also plain to use a carb not fuel injection. Any feedback on making it a 331 vs 347?
  16. GONDO79

    ANY SUGESTIONS ON A ROLLER MOTOR BUILD?

    I just got my hands on a 87 mustang roller motor. Ive been read up how u can get a up to 400HP. I plan to use it 40%street 60%strip. i still want to be able to cruise it on cruise night. I also plain to use a carb not fuel injection. Any feedback on making it a 331 vs 347?
  17. GONDO79

    Ignition Switch

    So I'm having issues with my tranny...and when I finally give up and try to start it the Damm Ignition Switch takes a dive! DAMM IT! It's brand new....It worked fine until now...the key won't come out and I can figure out how to take it out. Any Ideas?:nonono:
  18. GONDO79

    TRANSMISSION HELP!!

    FINALLY AFTER 2 MONTHS OF NOT WORKING ON MY CAR,I ADJUSTED THE SHIFTER AND BLED THE BRAKES ON MY STANG. JUST WHEN I WAS ABOUT TO MAKE A TRIP TO THE MUFFLER SHOP I REMEMBERED THE CONVERTER IS A 11" 2500 STALL. I HAVE A 302 WITH AN AUTOMATIC C4 WITH A SHIFT KIT.I ALSO HAVE A B&M ALUMINUM DEEP PAN...
  19. GONDO79

    ANY SUGGESTION ON RIDE HEIGHT FOR '64

    Im planing to upgrade my suspension on my street/strip 64 couple. I still can decide on lowering it an inch or keeping it stock height. Any sugestions and pictures could help a lot. Thanks!:SNSign:
  20. GONDO79

    brake switch on the 64 mustang

    I did a granada disc conversion on my 64. Orginally it was a inline 6. Now tha master cylinder was a single resevior when I got the car. I upgraded to a dual aftermarket MC but now my brake light dont like up. I changed out the harness, light blubs, and housing still nothing.:mad: turn...
Top Bottom
Back
Forums
Menu