Search results

  1. 2

    Fox Rear Hatchback Carpet Questions

    Thinking about doing the rear interior of my 89 gt looked at 50resto i like the titanium gray but its for 90-92 is that just when the color was available or is the rear carpet set different?
  2. 2

    starter problems

    ok i have a 98 gt auto. Monday the starter went bad. So i replaced it after fighting with the 3rd bolt for hours i finally got it out. I replaced it i olnly put 2 of the bolts back in(i talked to a couple other people said if i left it out there wouldnt be a problem). So i start the car it makes...
  3. 2

    anyone have a exploded t5 laying arround

    ok my boss threw out a couple of parts by accident i need them to get my car back together.if anyone has one let me know.
  4. 2

    qa1 k member steering shaft issue

    i have a qa1 k member installed in my 89 notchback the rag joint and steering column line up but it seems to be short the bolt wont go through anyone else have this issue?
  5. 2

    column install with qa1 k member

    i have a 89 notch with full qa1 set up up front i have the k member all the way back and the column doesnt seem to reach any suggestions. thanks larry
  6. 2

    jegs vs weld draglites are they the same?

    looking at weld draglites for the front of my stang jegs brand 89.99 weld brand 199.99 will the center caps fit from the welds?
  7. 2

    whats the difference between 79-89 camber plates and 90-93?

    some companies say 79-89 and90-93 others say 79-93 whats the deal?
  8. 2

    how to pick a lightened flywheel

    well i pulled the clutch and flywheel off i need both so lightened is the way im going balanced unbalanced 50 oz. or 28 oz.. no idea what im doing my car is 89 5.ol im going with king cobra clutch.
  9. 2

    i installed rear upper and lower control arms on my 89 notch and.......

    now my mustang is the offroad model i even tried to loosen the bolts and preload the rear with a floor jack. anyone else have this problem? my car is 89 notch installed southside uppers and lowers
  10. 2

    rear control arm question

    i put south side upper and lower control arms on. now i have the offroad model of a coupe. i left the bolts loose and used a floor jack to push the rear into place it didnt work.
  11. 2

    looking for pictures of the plugs that go to the steering column

    2 of the wires came out of one fo the plugs?not sure which plug or where they came from?
  12. 2

    im possibly going to attempt ghost flames

    ok some of you have checked out my build im thinking of either doing a ghost flame or a ghost racing stripe but the mixing of paint thing is throwing me off. im using the dupli color paint shop paint system. im thinking since its so cheap and temporary. im going to try my hand at custom paint...
  13. 2

    qa1 k member a arm install problem

    ok i installed my kmemberwhen i went to install the rear A arm bolts there is no enough clearence for the complete bolt head to fit inbetween the rear tab that the arm bolt goes throgh and the tab that bolts the k member to the car. should i clearence the k member or shave part of the bolt head?
  14. 2

    put my t5 back together new issues

    ok the new problem is the shifter doesnt feel like the detent ball is poping into the holes it also doesnt feel like the shifter goes all the way to the reverse/5th gear part of the pattern does anyone have the instructions from putting the cover back togetherwith shift forks and all
  15. 2

    t5 issue when replacing rear bushing and rear seal

    ok so i replaced the tail shaft seal and bushing i put the tail houssing back on and it seated fine. then i forgot to put the spring,ball and shifter back on so i pulled the housing back off and tried to reinstall it again it wouldnt seat all the way now.so i pulled the tail housing off again...
  16. 2

    guess who's got 2 notchbacks to make 1 car loads of pics

    you could have guessed it i found it in a barn for $100 needs some body work and ill swap everything from my 89 notchback.these are from like last week and heres where all the parts are coming from
  17. 2

    i installed my pro 5.0 short shifter questions?

    i installed it in my 89 coupe the shifter in first and 2nd feels a little too straight un and down. anyone else have this problem?it almost feels like where 3rd and 4th are if you know what i mean
  18. 2

    fox body style difference 79-86 87-93

    besides the front end and quarter windows is there any differences?i just bought a 85 notchback 4cylinder. im swaping everything from my 89 notch. i do think the flare on the rear wheels is slightly bigger but i havent picked it up yet. any other differences?im doing a complete swap interior and...
  19. 2

    gt40 intake gasket question

    looking to get a replacement gasket for my gt40 manifold its not the explorer version. the gaskets look the same are they?
  20. 2

    i have when im in the middle of making deals then bamm

    i had deal worked out on godragracing.com just short of phone numbers and meeting place. then the site shuts down.im hoping the same people find the new reinvented site.
Top Bottom
Back
Forums
Menu