Search results

  1. gwiedner

    Anyone running SPEC brand clutch or have any experience with this?

    When I bought the car the guy said it had an aluminum flywheel and SPEC Stage II clutch in it and the clutch pedal is really stiff. I have an adjustable clutch quadrant. The clutch grabs hard and doesn't slip with the power im putting out, 225hp and 304tq to the wheels....I was wondering if...
  2. gwiedner

    Will I gain anything?

    With the mods in my signature I am still running the stock maf and can pick a up a 76mm C&L maf for like $50 locally is it worth it? Will I see any gains? I got the car dynoed a few weeks back at 305tq and 225hp at the wheels and they said it was running pretty rich and had at least 25 more hp...
  3. gwiedner

    Will I gain anything?

    With the current mods in my signature I'm still running the stock MAF and I could pick up a 76mm C&L for like $50 is it worth it? Will I notice any gains? I got the car dynoed a few weeks back and was at 305tq and 225hp at the wheels and they said the car was running rich and had another 25 hp...
  4. gwiedner

    New Seats...Scat Procar What do you think?

    I am looking at replacing my seats with the Scat Procar ones from Summit anybody have pics/experience with these seats? How do you think they would look in a fox? I've searched and cant find any pics around. I like Corbeau but they are alot more expensive and I think you are paying a lot for...
  5. gwiedner

    Worth it or Not?

    So I have all the mods that are in my signature....basically all bolt ons...I have a 75mm throttle body and I wanted to upgrade my stock MAF and injectors then get it tuned but will it even be worth it or should I just keep my current set up with the stock MAF and 19lb injectors? If a tune is...
  6. gwiedner

    Plugs behind Radio??????

    I am in the middle of installing water temp and oil pressure gauges under the radio but when I went to pull the old aftermarket radio out it was not wired up using a plug. All the wires were spliced into other wires. There are two plugs behind the radio which are not plugged into anything. I...
  7. gwiedner

    WTF...Please put my mind at ease on this one.

    Here goes...I was getting ready to install my new mechanical oil pressure gauge and started by taking off the stock sender so I could get all my fittings matched up...Well my buddy was looking for an accessory wire and somehow started the damn car and oil began spewing out of where the stock...
  8. gwiedner

    Check out my gauge plate...(pics)

    I got this made from gaugeplates.com....it was a lot better quality than I thought it would be I figured it was just going to be made out of the same plastic like the radio install kits but its not. I just ordered my mechanical oil pressure and water temp, Autometer Phantom II gauges from...
  9. gwiedner

    Refinished Quarter windows and trim (PICS)

    So I spent everynight after work for a week refinishing my dry rotted quarter window moldings and trim around the doors and windows....Everything was done while on the car and turned out extremely well and gave the car a much better look...I apologize about the pics they looked alot better on...
  10. gwiedner

    Opinions needed....

    I just got my gauge plate that mounts two gauges under that radio from gaugeplates.com and the quality definatly exceeded my expectations. I want to mount mechanical oil pressure and water temp, however I'm torn between the Autometer Sport Comp II and Phantom II gauges. I was going to do white...
  11. gwiedner

    Trick Flow Top End Kit Suggestions..?

    I am considering buying the trick flow street burner top end kit but wanted to know if anyone has any experiences good or bad with it. Its going on my daily driver, about 10 miles a day. The motor was rebuilt about 5k ago with hyper. pistons instead or forged I don't know if that makes a...
  12. gwiedner

    What Brake Light is this..?

    Does anyone know what brakelight this is on the SLN wing? I want to replace it because this one is faded but I'm not sure what to replace it with. Is it the 87-93 GT 3rd brake Light?
  13. gwiedner

    Temperature Probe Clarification Please

    I just picked up a 92 Gt that has an electric fan already installed with a switch that can turn it off and on from inside the car. The teperature probe is coiled up behind the adjustment knob for the control unit does anyone know where it should be in the radiator I've read a lot of different...
  14. gwiedner

    Cant fit front center caps on...Any suggestions..?

    When I bought the car it already had a 5 lug conversion done to it has 18x9 cobras all around but on the front the center caps wont fit because the dust cover on the front hub is in the way. Is there any way to make them fit? A buddy suggested denting them in with a hammer but I dont know...
  15. gwiedner

    I need new tires...Whats your opinion..?

    So I have 18x9 cobras all around on a 92 fox with 2 in. lowering springs and tociko shocks and I'm desprately needing new tires. As is the car gets no traction through 3rd gear. Its a daily driver but I like to take it to the strip on weekends, and the occasional stop light race if a piece of...
  16. gwiedner

    Need Exaust Help...I intalled an X Pipe...

    So I installed a set of BBK shorty headers on my 1992 GT along with an off road X Pipe with o2 sensors, no cats. Well after installing the X-Pipe and headers there was no spot on the off road X-pipe to run the vacuum line, exhaust check valve line, from the old cat. converter to the air pump...
Top Bottom
Back
Forums
Menu