Search results

  1. M

    intake filter

    its the pcv valve screen
  2. M

    intake filter

    what is the filter that goes in the back of the lower intake and where can i get a new one?
  3. M

    priming oil pump

    i bought one of those tools that attaches to a drill to prime the oil pump. which direction do i go and for how long?
  4. M

    oil pump shaft

    yea i was trying to put in from the top... it was my first time and i couldn't find the hole:D
  5. M

    timing cover and water pump question

    it has been so long since i took these two off and i forgot how to bolts go. any help would be appreciated greatly. there is no a/c or smog pump
  6. M

    oil pump shaft

    i tried to fit my oil pump shaft into the oil pump but it is about an inch and a half too short. am i doing something wrong?
  7. M

    motor mount qusestion

    i took off my motor mounts today and i noticed how big the holes are. is there a way im supposed to line the engine up when i drop it into the car?
  8. M

    new motor qestion?

    i heard you get 10rwh from taking it off? just kidding i just want my engine compartment to look clean so i want to take it off
  9. M

    new motor qestion?

    the liner on the inside of my hood is falling apart. i don't want it to mess up my engine because its gunna be all nice and clean can i just take it off and not use one?
  10. M

    what is this and should i replace it?

    it was screwed into the oil pan
  11. M

    hydraulic roller lifter ?

    how about the lifters they look ok but i heard they get worn into the cam
  12. M

    hydraulic roller lifter ?

    my engine is a 308 with a e303 cam gt40 cast iron heads w/ 1.7 rr and gt40 manifolds does it matter what hydraulic roller lifters i get or is there one that is better than others for my set up? also i the heads are from my old engine and i still have the pushrods... will they work or do i have...
  13. M

    where to get maf?

    i was thinking of going to a salvage yard to see if i could pick up a set of 24lb injectors. i know there are many vehicles that have injectors that will fit into my stang but what about the maf?
  14. M

    can i do this at home?

    i forgot to ask... there is almost no gas in the tank should i pur out what is left and or is there a way i should clean it out?
  15. M

    can i do this at home?

    i have the fuel rails disconnected at the front of the car because im putting a new engine in. do i need the same disconnect tools that i used to disconnect the front lines? are there any other words of wisdom you guys can give me to make the install go smooth?... it was like 100 degrees...
  16. M

    can i do this at home?

    i bought a new in the tank fuel pump if i put the car on jack stands will it be high enough for me to do the job or should i pay to get it installed?
  17. M

    Need help ASAP!

    i need a an engine bolt kit for my 89 302 i found the one in the link from summit but it only has it listed up till 87. i called the summit tech line and they told me that it says that ARP has it listed that 88 thru 93 may require additional fasteners. im guessing they mean for the a/c and...
  18. M

    overflow bottle question

    my radiator overflow container is broken and i'm switching to an electric fan. does anyone have any idea's on what i should do. i've seen some aftermarket ones on ebay but im not sure what to do.
  19. M

    anyone use torrents?

    does anyone know of any links to download instructional videos from torrents?
  20. M

    is this a good deal?

    i found this on ebay and was wondering if these intakes are good? i would think it would easy for water to get in http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=020&item=300002744627&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
Top Bottom
Back
Forums
Menu