1993

Hey everyone, I’ve got a 1993 F150 302 roller block, E6 heads. Long time ago started an engine tear down to have a little more power and just to have refreshed. Thought I would buy a bit more aggressive melling 24214 cam (stage 2) for it. Not realizing the different firing orders of the HO to...

While using the Equus Ford OBD I code reader, after preforming the KOEO test and passing then preforming the KOER test I'm getting codes 33 ( EGR valve not opening properly (just replaced it today) and still getting that code why? Code 34 which is the same as 33, code 44 (thermactor air system...

I have a 1993 Mustang Convertible that I removed the 2.3 4 speed from and I bought a 1989 302 to install. Is there a difference between the parts from the 1989-93? Should I buy engine parts for an 89 or 93? All I have from the 89 is the block, crank and pistons, and I will be using GT40 p heads...

On a road trip and broke down on the side of the road, seems to be the smog pump cause it seized up won't turn at all by hand. So what size belt do I need, what belt path configuration do I need and what consequences come with driving another 1,000 miles so I can get back home? It's a stock...

My 1993 fox sometimes it hesitates and you can hear like a pop sound on the back when you floor it. The car is completely stock like 2 weeks ago bought a 255 fuel pump Codes: 81,82,84

my 1993 Mustang these last days after 10-15 minutes the temperature begin to rise, normally stay below half The fan clutch was changed when buy it because was overheating And the I think the thermostat is opening I took this picture inside the rad that’s don’t look normal

I have a 93 2.3 manual and currently have the opportunity to pick up a good running donor car that is an 88 5.0 manual, but it has no title. Being new to this I’ve been looking everywhere for an answer to my question. I know the engine harness will have to be used but since the two years are...

93 LX coupe. I Daily drove it for a couple years before it went into paint. Nice car. 2.3L out of an SVO Mustang. Mild mods to a fully rebuilt stock engine (BNIB Ford replacement 020 pistons, etc). Has roughly 11,000 mi on the rebuild. Runs great. 5 speed manual. It is actually a V6...

Replacing the capacitors in your Fox Mustang EEC? Here is the quick and dirty info you need so that you don't have to look all over the place like I did. I watched every YouTube vid I could find on replacing these 3 caps. I also watched plenty of “how to replace capacitors” in general. I have...

Does anyone know the value? Engine only, no trans. Milage unknown.

I have asked this before but I figure I'll ask again in this forum. I have a mostly original 1993 LX in need of rust repair and restoration. The car has 185,000 miles and needs quite a bit of work. It is an original 5.0, 5 speed car. The original Royal Blue paint is faded. It is numbers...

Hi everyone. Im about to restore a 67 Mustang with a 5.0L H.O. engine from 1993 Fox. Its my restomod. Ive read a lot of vacuum leaks and engine problems... to my set up. Ive got the original mainfold intake and the original alternator on this engine. Nothing else. So my question: What vacuum...

1993 Mustang Cobra for Sale VIN: 1FACP42D5PF137089 Car is number 37 of 4993 75254 Miles Location: La Porte, Texas Car is pretty clean, needs a few things... Comes with all 4 stock wheels as well. DM Message and can send more pictures and video... $18500.00 or best offer!

What's a '93 steering column with a good airbag worth? Minimal wear.

Super clean 93 with 43,900 miles on the clock. You really need to see it to appreciate it. The only modifications are an aftermarket radio, flowmasters and a 6 speed T56. Here is the story.......I just purchased the car with the intent of having a perfect foxbody that I could do minor mods and...

This is my Mustang, I am taking it over from my uncle's collection of cars, I am hoping to complete a full restoration. The back glass is shattered, the convertible top has tears in it and the front seats are virtually unusable. The quarter panel has been rusted through on the driver side and...

I have a 1993 GT, and I have been going through the steps of an IRS swap over the past several months, and finally drove the car about 1 mile. The problem now is that there seems to be quite a lot of driveline resistance. I have thoroughly cleaned out the diff and have fresh diff oil in there. I...

1993 Mustang LX 5.0 manual. This is my son’s first car. It is a father/son project. It was wrecked in the front pretty bad when he bought it. We restored it ourselves and it is his daily driver. It was said to been bored .40 over. No records provided of build. It runs and idles well. The problem...

Hi, is there a way to make a mustang 5.0 1990-93 engine harness a3m computer work with a 89 dash harness? Please let me know if there's anyway to make this work other than buying a whole 89 engine harness, thanks!

Hi, So I have a 1989 4 cylinder notchback manual that I will be converting to a 5.0 using a 1993 5.0 manual donor car. My question is what is the best way to tackle down the wiring with this situation. I know that 89 and 93 mustangs have very different wiring diagrams and pcms. Also since they...