Hello All,
Sorry if this has been posted already, new to the thread; but I have a 91 gt with some whining noises coming from the alternator, which you can hear over the engine, and increases with revs. The only issue with the alternator ATM is the noise, and I suspect the bearings are going...
I installed a new alternator after the old one took a crap, and after the first drive, it stopped charging. I’ve checked all the fuses and the battery indicator lamp, and the connector that powers the lamp doesn’t have any power going into one of the terminals to power the lamp. it’s the LG/R...
$360 shipped
Lafayette, IN
I'm selling my set of 2001 Cobra export style tail light wiring harnesses that have the additional bulb socket for the amber turn signals. Ford OEM parts. They're in great condition and full working order. 5 pin connector intact with all socket seals, mount pins, and...
Im currently trying to simplify the harness from the ecu(microsquirt) to the engine harness. But i have not had any luck finding the pin out information for the 16 pin connector for the engine harness. If anyone has any information on it it would be of great help
MUSTANG GT 1995 5.0 automatic
Yes I’ve seen a lot of similar problems being posted but mine is insane and can not fix the problem!!!
This all happened not too long ago as soon as I stopped on the first red light after exiting freeway my car died, before any of this happened I had previously...
Quick question.
Yesterday I went to start my car is it began to smoke and wouldn’t start.
I found a wire that was melted. (Green wire)
When I found the wire it was split in half, which leads me to believe it was never connected. I cut the wire and taped it off and then the car started right up...
Which connectors are you guys using to plug into each fan? I bought the dorman ones that are supposed to plug into each fan. They plug in nicely, but they don't make a solid connection. When you let go of the connector it isn't seated far enough and doesn't make a solid connection. Plus they...
I have a '95 Mustang 5.0 GT SN95. While searching for the OBD1 connection I found another connection outlet that says 'AUTO GUARD'. It's below the steering column under the dash. Does anyone know what this is for? What connects to It? Thanx for any help. Sorry about the side ways picture.