forced induction

  1. MadSquirrelTech

    Progress Thread Evolution of the 'Hudson Heap' plans (87 GT)

    Well, I've been working (albeit slowly) on my 87 GT in my spare time between building chicken coops, building out my workshop, clearing property on my homestead, etc. and have torn into things on the car a bit and learned as I go along. My idea for the car is starting to take shape and I'm...
  2. S

    Can I add a low boost (turbo or s/c) setup to this configuration?

    Stock block 347 scat forged crank and rods, mahle flat top pistons,190cc twisted wedge, edelbrock pro flo 4 efi w/ 29lb injectors, walbro 255 fuel pump. 10.8:1 compression Would it be advisable to do a power adder with this setup? If not what should I change I am not looking to make a ton of...
  3. W

    For Sale Department of boost GT550-S 550-600HP Supercharger System for 2015 to 2017 Mustang GT

    Department of boost GT550-S 550-600HP Supercharger System for 2015 to 2017 Mustang GT. Kit has never been installed as I am going in a different direction with my build. The kit comes with everything to complete the install. The full list of base install parts and install steps are located at...
  4. Cammandobrando

    97 cobra s trim 10lbs of boost guess

    Hey guys I have just acquired a 97 cobra , and I am told it has H beams and forged pistons , it does have an air to air and , a larger throttle body , runs 9-10 lbs of boost , I’m just curious if anybody has an idea what kind of power I should see on the dyno , any guess’s or answers would be...
  5. Cammandobrando

    97 cobra s trim 10lbs of boost horse power guess

    Hey guys I have just bought a 97 cobra with an s trim , currently running 9-10 lbs of boost , the car has an air to air intercoooler , and according to what I am told H beams and forged pistons , I am going to dyno the car once I can get to the closest one , but I am curious what kind of numbers...
  6. FoxMustangLvr

    Forced Induction, keep reliability while adding more boost, less timing? Pull up a chair..

    My car runs great and has great power and I'm very happy with it. Still I get to thinking, can I somehow keep the reliability of my supercharged 5.0 while increasing PSI? I have the itch to increase boost a little bit, say from 11psi to about 14psi. In doing so I'd pull some timing out to make...
  7. D

    2001 v6 turbo eagle rods and pistons question

    So I'm gathering parts for my turbo build and was gonna stay stock internals for a while but I was looking around and found some companies like eagle selling "ford sc 3.8 rods" or in some other place it just says ford 3.8 so my question is this will those rods fit my 2001 and what about pistons...
  8. zhendo95

    Just Purchased; 1997 Mustang Gt - Need Advice

    What's up guys! I just purchased a 1997 Mustang GT. This is the 5th mustang I have owned however it's the first I have had with an S/C setup. I just wanted to get a few outside opinions on it. Sorry for the long post in advance: More about the car: 4.6L - Dash reads 60k miles -Wynjammer...