foxbody

  1. F

    Rancho GT-III, Foxbody Mustang Swaybar Parts

    Hi there, I’m new here. Can anyone identify these sway bars? I got them with my 1985 GT that I’ve had for years. They were supposed to be aftermarket sway bars for the fox body. There are no spherical end link connections on the ends, and that bar is 1.25”. The other one with the brackets...
  2. 5

    NEED ADVICE FROM COMMUNITY MEMBERS

    I drive an '89 Mustang GT automatic I got in a front end collision last year and the damage went all the way to the fan, completely dented the radiator support. I replaced all necessary parts, fan radiator, ac condenser, welded front end back on and put in a new front bumper and hood. The car...
  3. T

    Heater Core fix

    I have heard several people say in different places its possible to replace the heater core without pulling the dash through the glove compartment. Has anyone done this or can think of a way it would be possible? I was thinking of cuting the box of where you can see it in the dash. Any advice?
  4. I

    1988 Mustang possible transmission shuddle?

    Hey guys, new to the forums. Not too long ago, my car began to buckle under deceleration. 1988 mustang gt AOD. Seems like if I let it coast under 30 to 35, it starts to buckle. At first, i thought it might have been a bad motor mount that was broken and making the engine rock around upon...
  5. beyondEOD

    SOLD MOATES QUARTERHORSE QH EEC Tuner

    Used Moates QuarterHorse, works perfectly. Comes with remote USB terminal and regular usb tuning cable. Works on 2004 and older Ford EEC computers. $190 shipped lower 48. Highland, Indiana
  6. 1989LXFOX

    Engine 2G Alternator Install Wiring Help

    Hello all, I hope this post you and your family safe and healthy! Since we are all most likely stuck at home I had a question for an issue that has been bugging me. I looked elsewhere and cant find any information whatsoever to help. So here we go... I purchased this alternator...
  7. K

    Electrical Can someone tell me what these connector is for on 91lx ecu harness

    Im missing a connector behind my dashboard harness that goes to my ecu harness..one of the 3 rite by the ecu connector and kinda wana know what it's for
  8. Q

    Foxbody 5.4 4V Build Thread

    Hey everyone, this is going to be my build thread that anyone can reference in the future because I know this swap is scarcely documented. If anyone has any questions go ahead and ask away I've basically planned this build for a few months. A little about the foxbody (1984 Ford Mustang GT...
  9. Foxbody1988

    ANY HELP IS APPRECIATED 1988 mustang gt

    Ok guys I have a lengthy question/issue. So I rebuilt my motor about 4K miles ago. Fresh bore, hone, pistons and rings.. the whole nine yards. I noticed it was lacking power so I did some compression checks. I only did 3 cylinders and they were all relatively low numbers between 65-100 to be...
  10. B

    Timing not advancing

    Just swapped in a 351w carb Into my 86 foxbody and for some reason the timing isn't advancing under acceleration . It is mildly built. Any help on why this might be happening or what causes this?
  11. S

    Drivetrain 1983 mustang rear end swap

    hey dudes, I'm swapping the rear end of my 1983 fox and was trying ti figure out the compatibility of rear ends i could choose from. I am totally unsure if what will fit underneath my car. help is quite needed to this new mustang owner.
  12. J

    Engine 93 lx 2.3l runs terrible

    Having a slight problem, new to mustangs and just got a 93 foxbody (5 speed) a few days ago. It Sat for a while, not sure how long. Anyway, it runs really rough. During idle it isn’t too terrible, sometimes it might vibrate. But the real problem is when I try to drive it. The car has no power...
    • JDiFet
    • Thread
    • 2.3l 93 2.3l 93 lx air charge temperature sensor air problem code 114 code 222 foxbody fuel problem icm running rich runs rough
    • Replies: 9
    • Forum: 2.3L (N/A & Turbo) Tech
  13. A

    Need help identifying engine

    Hey boys I recently got an 85 lx with a “69 boss 302” engine in it I just want to fact check that and I’m not sure how exactly. Casting number is C80E-6015. Thanks
  14. N

    For Sale 1993 LX Hatchback

    Super clean 93 with 43,900 miles on the clock. You really need to see it to appreciate it. The only modifications are an aftermarket radio, flowmasters and a 6 speed T56. Here is the story.......I just purchased the car with the intent of having a perfect foxbody that I could do minor mods and...
  15. 91mustanglxcoupe

    89 Mustang MS3 gold box tuner studio idle control and injector dead time

    I have a 89 mustang with SBF 302 with GT40P heads and Vortech V1 blower at 10psi and running the ms3 gold box with tuner studio. In the idle control section I'm trying to find out what the valve mode is supposed to be set at inverted or normal for a stock IAC valve. Idle valve type is set at PWM...
  16. Z

    New guy

    I’ve been doing a lot of research on first project cars and fox bodies have been talked about the most out of anything that appealed to me so I’ve decided i want to get one. I haven’t done a ton of work on cars other than basic oil changes, plugs and other basic maintenance. Am I in the right...
  17. S

    T-top seals question

    Ok so I have a 91 hatchback and I am using it to recreate my old highschool/tech School car. Wich was an 87 with t-tops. Now I have watched a few videos and done some research on the matter of putting t tops in the car and it's a pretty simple proses. I already have the needed parts. 87-88 t-top...
  18. Slow92Vert

    New Member

    Hello fellow fox body owners, I am Josue, a southern California resident and proud Fox Body owner. I am new to this community but I am very eager to learn and work on my own Fox. I will try my best to interact and post updates of my projects as they come along. Here is a few pictures of my...
  19. C

    Considering rebuilding my 1989 mustang GT 302

    I have a 1989 mustang GT 5.0 manual trans I believe the car is bone stock besides a cold air intake. I have never attempted an engine rebuild but. I have always wanted to my goal for the motor is to make around 400rwhp I don’t want it to be a daily driver but I am seeking reliability I wanna be...
  20. M

    New trick flow top end

    Hello, new to this! Ok so Im going to jump to it. I have a 93 mustang triple white, so im going to start with my mods i had before the top end. BBK fuel pump not sure on name but its to match the maf and 30lb injectors. I had a bama tune but took it out because it wasnt calibrated for those...
Top Bottom
Back
Forums
Menu