Ok I’m goina try to get all the relevant info out and hopefully someone knows what the golly gee whiz is up. I have had this 89 mustang 5.0 for a while now and has sat for maybe 8 years. It has an aftermarket security system(black widow, 2 button fob) in it that came with when I bought it. It’s...
While using the Equus Ford OBD I code reader, after preforming the KOEO test and passing then preforming the KOER test I'm getting codes 33 ( EGR valve not opening properly (just replaced it today) and still getting that code why? Code 34 which is the same as 33, code 44 (thermactor air system...
OK so something in the top end sounds like marbles rolling around here is where I'm at.
B303 cam new
Scorpion 1.7.2 rockers new
Pushrods 6.250 comp cams hardened new
Heads aluminum new
Upgrade springs 5.50 lift is what they are rated for
Lifters ford racing new
OK so I soaked the...
I have a 2003 mustang V6. I noticed opinion in the engine a couple months back I've been babying it and it's still there even though I tried premium gas octane booster everything I can think of I replace the PCV valve I replace the fuel filter. I took it to the shop and they said that they're...
Bought an 01 gt new edge. Car runs great filled up the tank and now it wouldn't start. No fuel and the pump wasn't making noise so I checked all my fuses and inertia switch and everything was fine on that end. so put a new fuel pump in. As well as new inline filter. Car still won't start I cycle...
I have a 1990 foxbody that I got handed down to me and it’s been sitting for over 10 years and I need help. I’m going to drain all the fluids out of the car first and my first question is to drain the gas can I just funnel it out or do I have to drop the tank and drain it out that way.
I own a 1986 GT and I have noticed that when driving on the freeway going 70 mph or higher, after I release the gas pedal to slow down a bit I hear a deep vibration noise coming from the back right wheel area. It sounds like something is whining but it is a very deep tone. The car leaks brake...
Looking to see if anyone can tell me how to safely remove wires from fuse box. Was doing some wire clean up and cut wrong wire on accident. But don’t wanna ruin fuse box to get wires out. Thanks jay
So I bought my 2011 mustang gt manual not to long ago it had all factory clutch assembly and in gear 1 and 2 sometimes when I press the clutch pedal in their is a pop noise and it can be felt through the car. I have replaced the transmission and entire clutch assembly and I’m still getting this...
I have a 1999 mustang GT. I bought the car with a B&M hammer shifter in it. This past week the little lever you pull up on to push the shifter forward to go into reverse and park broke. There used to be tension when I pulled up on the lever but now I pull it up and it just falls down. I'm not...
I just recently purchased my 1999 mustang v6, the guy who sold it to me said it had no problems that he knew of ofcourse... and a day after me driving it, it started to stall and sputter and jerk extremely bad! I have replaced the fuel filter, it didn't seem to dirty but was dirty, I also...
Hey I'm buying my first car and I caught a ride around base today in a guys 06 roush stage 1. I thought it was amazing so I asked him if he ever thought about selling it. He said he would take 12000 with 89000 miles on it but isn't actively trying to sell. just wondering if it was a good price...
Okay so I recently acquired a 2004 V6 Mustang with a black finish, pony delete billet grille, my question to anyone willing to help is, how would I install a running pony emblem into this grill without having to get a whole new grill. I have the emblem with double sided tape and I'm out of ideas.
Hey Guys,
I have an 89 LX 5.0. It has:
GT40 heads
Edelbrock intake
75mm tb
Upgraded injectors/fuel system
Shorty headers (bbk)
Bbk cai
Open exhaust into 40 mufflers
4.11s
I'm looking for a cam that is comfortable o the street, but slopes really hard. I know this sounds funny, but I would...
Hey all, i am new to the forum so first and foremost i would like to apologize if this post already exists somewhere, or if i have already broken some rule i don't know about here. I know how forum members can sometimes be very particular about the rules of their specific forum being upheld...