new edge

  1. N

    Swapping a 1996 TekSkid 4.6 into a 2004 V6

    Hey guys, as the title says, I’m considering swapping a 1996 Cobra engine with its matching harness, T56 transmission, gauge cluster, rad and fans, and stock exhaust manifolds into my current car, a 2004 3.8L with the T5. I will also be swapping my 7.5 to an 8.8. I was wondering if anyone has...
  2. M

    Mark Viii Motor Swap into 99 V6

    I have a 1999 Roush Stage 1 V6 Mustang 5 speed and have recently acquired a 97 Mark Viii. I have access to everything in the Mark VII and know most of what the swap needs. My Main question is what work would need be done to wire my gauges and such into the Mark Viii ECU or if its even possible.
  3. T

    2002 gt - running rich

    Hey guys so i have a 2002 mustang gt i picked up recently with no cats, long tube headers, no o2 sensors, flowmaster 10’s, a jlt cai, 70mm throttle intake, smaller cams, larger injectors and has 70k miles. You can definitely smell the gas when it is cranked, and im not sure what the easiest way...
  4. M

    Abs Light

    The ABS and trac off light have been on in my 2004 GT since I bought it one year ago. I have replaced all brake pads, rotors, and calipers. I have thoroughly cleaned the ABS rings on all wheels; however, the lights are still on. I have been able to turn them off with a diagnostic reader, but...
  5. B

    2002 Gt Idle Issue

    I have a 2002 GT with full catless exhaust, CAI, Throttle Body, and Tune. When i first fire up my car it has a jumpy idle and has even died on me a couple of times; the wierd part is, is that I can go down the road for half a block and stop and the idle is perfectly fine. It only does it as soon...
  6. B

    Transferrable Parts Between 2008 3v And 2002 2v

    Hey guys, I was wondering what you could swap over from a 2008 manual 4.6 3-valve to a 2002 manual 4.6 2-valve. Recently was given a wrecked 3V with all mechanical functions still working. The main questions I have is, could I put the 08 transmission into my 02, they are both TR3650, But his...
  7. X

    Ported Edlebrock Intake

    Was wondering if anybody is running a ported edlebrock intake. Any noticeable gains? Who ported it? I'm thinking of having mhs port one for me since I'm getting stage 3 heads from them.
  8. N

    New Project, Need Help

    Alrighty I'm new here. I just picked up a project mustang. It's a 3.8 V6 (unfortunately) with 209k on the clock. I mostly picked it up because it's a manual and the body is in great condition.... and it was a thousand bucks. Here's what I would like to do. I want to build up another low mileage...
  9. M

    Gt Engine Swap??

    I got a 2000 mustang gt Whats a good engine? i want to be abe to be fast as a cobra terminator or a 2ss camero 2016 or a 2012 boss I may be unrealistic but I want to be at least fast as a termi tho... If u have any suggestions lmk cause I have 30k n I don't know what to swap my engine with 1...
  10. X

    Swapping A 5.4 Into An 01 Mustang

    Currently swapping my 01 mustang with a 5.4 liter motor already have the rotating assembly and in the process of getting it shortblocked. Then will come heads and cams already have everything planned out my only questions really are is there any little things to look out for? Such as headers not...
  11. 1NSTY2VSLN

    Best Shift Point??

    So I've been debating what the best place to shift at is when doing a hard pull. Normally i shift slightly above redline right about 6000-6100. I know the max hp is at 5250 rpm so that is about 800 rpm above peak hp. But with my stock 3.27 rear end, when i shift i drop down to 3900-4000 rpm...
  12. TheJarlofNewEdge

    99-04 Gt, Calling All Mechanical Bug Wizards

    New tadpole in the pond here But I am having some problems, i've thought long and hard about, but i live in the boonies, the mechanical experience is around here but i can't seem to come to a conclusion - had stock gt w/K&N intake - running fine - installed pypes o/r H - tried eliminators...
  13. Sketchy_GT

    1999 Gt Few Small Problems

    Just bought a 99 GT and I owned an 03 before so im used to being around these cars,but I have a few issues im stumped about. Such as the theft light stays on 97% of the time and if the key is in the switch the key reminder chime goes off til you crank it whether the doors are open or not but...
  14. Sketchy_GT

    1999 Gt 'vert... Buy It?

    I've found a 1999 GT convertible here locally in north Alabama for a grand total of $5,000 with just under 96,000 miles. Took it for a test drive today and I love the way it drove (first 5 speed New Edge I've ever drove) my only problem with the car is that i noticed that the trunk had a damp...
  15. S

    Looking For A Wounded Cobra.

    Hey ! New to stang net and looking for a 99-04 cobra to fix up(blown motor/transmission, wrecked). I'd like a termi but it isn't a deal breaker to go older. I don't know if there are specific junk yards or if anyone sees one for sale but I've had no luck so far. If you know where or how to find...
  16. S

    Recovering Corvette Owner Looking For A Terminator.

    Hey ! My names Sam and I've been a Mustang fan for a really really long time (I saw carrol at a car show when I was six, since then basically) but when I was 16 I bought a c4 corvette because horsepower was cheap. Man was it horrible. But now I want a terminator and can't afford a full one so...
  17. B

    Help! 99 Gt Intermittently Misfiring

    i have a 99 GT auto vert with about 125k miles. i bought the car in december of last year for dirt cheap (thing was leaking coolant bad, among other things). since then it's pretty much been a continuous project as it is my daily driver. I've been able to tackle most issues with it, but now i'm...
  18. 0

    Nitrous Jets

    Not sure where this should be posted under but I'm not sure what fuel jet to use for the 100 shot I'm going to be running on my 04 mach 1. I have the nitrous outlet kit and know the nitrous jet is 52 but I'm not sure which fuel jet to use. I have seen some use the 23 fuel jet and others use 28...
  19. Mustang Lowering Springs Install - SVE Springs & Caster Camber Plates (79-04)

    Mustang Lowering Springs Install - SVE Springs & Caster Camber Plates (79-04)

    Need more information on how to lower your Mustang? Click here: http://www.latemodelrestoration.com/products/Mustang-Lowering-Spring-Installation-79-04 Adding a set of lowering springs to any Mustang is a must! Not only do you get the benefits of better handling but you also get rid of that 4x4...
    • Jarrod@latemodel
    • Media item
    • bbk caster camber cc plates coil spring eibach ford ford racing fox body foxbody how to install isolator latemodelrestoration lmr lower lower your mustang lowering lowering spring inst lrs mustang mustang lowering spr mustang spring insta new edge plates pro kit remove replace shocks sn95 spring spring install spring isolator steeda struts sve springs sve5300a urethane
    • Comments: 0
    • Media category: Mustang Technical Videos
  20. Mustang Corbeau LG1 Racing Seat - FREE SHIPPING (79-Present)

    Mustang Corbeau LG1 Racing Seat - FREE SHIPPING (79-Present)

    Shop our complete line Mustang Corbeau LG1 Racing Seats: http://www.latemodelrestoration.com/products/Corbeau-LG1-Racing-Seats The Corbeau LG1 seats are a customer favorite when it comes to racing seats. They offer amazing looks to go with their performance on the track. The LG1 seats come in a...
    • Jarrod@latemodel
    • Media item
    • 50resto corbeau corbeau lg1 corbeau lg1 seats corbeau racing seats corbeau seats corbeau seats mustan fox body fox body mustang foxbody latemodel latemodelresto latemodelrestoration lg1 lrs mustang mustang corbeau seat mustang racing seats mustang seats new edge new edge mustang racaro racing seats racing seats recaro recaro seats restoration
    • Comments: 0
    • Media category: Mustang Commercials
Top Bottom
Back
Forums
Menu