• Tags

stroker

  1. G

    Drivetrain trickflow Stage 3 camshaft 347 stroker. also too much gear????

    hey yall thanks for having me. i currently have a 1986 hatchback running a 347 stroker. the cam that is in it is weak as balls its an old magum (35-440-8) and i am putting in a TFS stage 3 cam. i have 175cc heads from performance world (heard its a canada thing) and a 650 edelbrock carb. has...
    • Gross Virgin
    • Thread
    • May 2, 2024
    • 347 foxbody stroker tfs
    • Replies: 0
    • Forum: Fox 5.0 Mustang Tech
  2. 8

    Engine 302 block with a 355 stroker, would these internals work in a 351w

    Over the winter i am going to swap a 351W into my fox, currently i have a 302 motor stroked out to 355 (probe stroker kit) I am just curious if any of my current forged internals will work with a 351W. Here is my motor build list. Thanks for the help! Build list: Edlebrock e street heads 170...
    • 89foxjd
    • Thread
    • Oct 1, 2019
    • 302 351w forged internals stroker swap
    • Replies: 1
    • Forum: Fox 5.0 Mustang Tech
  3. Digital Tuning 1991-exhaust crackles

    Hello all, I have a 1991 347 stroker lx 5.0 with the HP EFI system. I have an off-road X-pipe with shorty headers, full tail pipes, and mufflers. I would like to know how to do exhaust pops and crackles, such as when I let off the throttle after acceleration. I have not had any success with...
    • paddyrk
    • Thread
    • Oct 9, 2018
    • 347 347stroker bang crackle exhaust hp efi lx pop stroker
    • Replies: 8
    • Forum: Fox 5.0 Mustang Tech
  4. H

    Cams and heads

    Hi I have a sn95 cobra i just got as my first car and am very interested in building it to a 347 down the road. I have experience in building engines just not anything serious mostly stock or small. Was wondering if someone could explain to me how to tell if a cam would work/fit in an engine...
    • holdfast
    • Thread
    • Jul 10, 2018
    • 347 stroker camshaft cylinder heads stroker
    • Replies: 1
    • Forum: 1994 - 1995 Specific Tech
  5. T

    Engine 1993 Freshly Buily 347 Seized?

    I have a newly built 347 i just installed into my 1993 mustang, new cam (b303), lots of other things thrown in as well, got everything in line, got it running for about 10 minutes, idling a little rough while it was cold which the old 5.0 i took out did as well so i figured maybe just an IAC...
    • tkollmeyer3
    • Thread
    • Mar 14, 2018
    • 347 foxbody help needed siezed stroker
    • Replies: 13
    • Forum: Fox 5.0 Mustang Tech
  6. T

    SN95 Sn95 351w Swap To 408 Stroker

    hey guys, so at the moment I have the factory 302 with 80,000 miles on the mustang. love the car but its to slow. So after this deployment I want to throw a a stroked 351w to 408 CID. looking for someone who's done the same thing as me and what they recommend. heres what I want: 1. Keeping the...
    • tyboudreau
    • Thread
    • Oct 22, 2017
    • 1994 1995 351 408 408w engine swap mustang sn95 stroker
    • Replies: 19
    • Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  7. For Sale [for Sale] 1990 Mustang Lx / 331 Stroker / 67k / Lots Of Upgrades

    Car is located in Durham, NC Asking $9,000 1990 Mustang LX, hatchback, red exterior, grey cloth interior, v8, manual trans. Very clean, adult Non smoker owned and driven. This is a 27+ year old car, it has small dings , scratches, minor faded paint etc. Never wrecked, all original panels except...
    • Denethor
    • Thread
    • Mar 6, 2017
    • 331 blower hatchback lx stroker
    • Replies: 7
    • Forum: Fox Body Mustangs For Sale (1979-93)
  8. S

    Stroker Build Questions

    I am about to build a 331 stroker to put in my 1995 GT. I have looked at threads on multiple forums but cannot find the answers I am looking for so any help would be great, thanks. (Carbureted, A/C Delete, No smog) 1) what water pump should I use? Do I need a High Volume water pump or will a...
    • Stang9597
    • Thread
    • Nov 30, 2016
    • 331 fuel oil pump sn95 stroker water pump
    • Replies: 47
    • Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  9. M

    5.0 Stroker How To Verify?

    So here's the deal: my engine blew and I stumbled across a really good deal for a stroked to 5.0 PI 2v 4.6. He has the oil pan off it and I was wondering how I could verify that it is indeed forged stroker internals. He was going to build it into a monster but instead went with the respectable...
    • Max22
    • Thread
    • Nov 16, 2016
    • 4.6 stroker verify internals
    • Replies: 7
    • Forum: SN95 4.6L Mustang Tech
  10. J

    Efi 363 Build

    I have a 87 gt Hatchback that has a stock 93 motor and trans in it. I`m purchasing a bare block 363 and im just looking at a few suggestions for build ideas (ex. cam,heads...) as well as trans combo, goal is 600-700 rwhp
    • Jchar04
    • Thread
    • Jun 18, 2016
    • build thread foxbody gt hatchback stroker
    • Replies: 8
    • Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  11. B

    408 Stroker With Stock Rods

    So if I'm understanding correctly, and doing the math right, a 408 stroker can be built utilizing a stock 351w block and the stock rods. I've been doing some research, and can not find any threads anywhere talking about this. But the math seems to add up, so please correct me if I'm off...
    • Bradley Duerksen
    • Thread
    • May 3, 2016
    • 351w 4.00 4.00" 408 stroke stroker
    • Replies: 38
    • Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  12. C

    Over Heating Problems, Need Help!

    I'm 19 and just got done with my 1st motor swap into my 1993 LX hatch. I swapped in a 347 stroker with less than 30k miles from my girlfriends dad. It was a solid motor no problems what so ever. I got it into my car with a new 3 core aluminum radiator, 180' t-stat, stock fan and it over heats...
    • Collin347stroker
    • Thread
    • May 1, 2016
    • 347 foxbody overheating stroker
    • Replies: 4
    • Forum: Fox 5.0 Mustang Tech
  13. Fox Coast High Performance 408 Throws A Bearing After 10 Months, 900 Miles... How To Proceed...

    Last year I replaced a long-running 351w in my 1966 coupe with a Coast High Performance 408. Classic car, but ultimately its an 80s roller motor, and more Fox/SN95s are running around with CHP motors than classics, hence why I'm putting this here (and probably in the classics too, and other...
    • SadbutTrue
    • Thread
    • Apr 7, 2016
    • bearing chp coast failure high lawyer need advice performance stroker warranty
    • Replies: 69
    • Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  14. R

    Expired 1990 White Foxbody With 331 Stroker, T56, And Much Much More

    Hello, my name is Ramsey Draskovich. I only joined this forum to sell this car; I'm about an hour out from Las Vegas but I will be willing to meet anyone in Vegas. Here's a list of the many parts my car has: 331 Stroker Compression 10..2..1 Forged Eagle Internals Trickflow forged Flat Top...
    • ramses_at_the_party
    • Thread
    • Nov 8, 2015
    • 331 anderson eagle ford racing forged internals moroso stroker t56 team z trickflow
    • Replies: 4
    • Forum: Fox Body Mustangs For Sale (1979-93)
  15. Who's Going to Win!?! Starsky & Hutch Torino vs Taxi movie car drag race - OperationMustang.com

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Starsky and Hutch movie car races The stunt car from the movie Taxi. This is an interesting match up and one that was fun to do! These are just two of the cars that are in Chris "the Doc"...
    • theStangDoc
    • Media item
    • Apr 9, 2012
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 1970 mustang 2012 mustang 396 burnout car cars cool crown drag ford ford crown victoria ford gt ford mustang mustang mustang burnout mustang crashes mustang gt mustang restoration operationmustangcom paint my car pitchman race starsky stroker taxi torino turbo vic
    • Comments: 0
    • Media category: Racing Videos
  • Tags
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?