supercharger

Hi All, I'm new to the forum (first post). I'm looking for good resources (any type) to help me prep for a supercharger setup on my 91 Fox GT. The car is not stock. Below is the current build. Looking for any advice anyone is willing to give. Thanks in advance! Block: 427 ford performance...

I have a 2005 gt that has a Paxton novi 1200SLnon intercooled. Guy I bought the car from installed it so I bought it the way it sits now. I have the bypass valve that came with the kit, and the guy I bought it from plugged the vacuum line that hooks into it because it ran funny… and said he’s...

Modified fox body Vortech bracket for 351W. Utilizes all engine mounting points and you can close your hood :) $800 USD + the ride, PP f&f or cash, located on the south shore of MA

I bought a 2002 GT with a paxton novi 1000 on it and im pretty sure based off my googling its got the: Lucas USA - Marine, 38#hr - 400cc/min, 12 ohms injectors based off the EV1 look and the part number on them “D1163BA.” but i want to see if anyone knows a decent upgrade to ev6 or ev14 that...

ISO TorkTech Inlet Elbow for Magnuson superchargers. This part was designed to work on MP112 blowers and TVS1900s. But it also would bolt perfectly up to my MP90 Saleen Blower. Really would love to get one of these for my car while I'm in the process of swapping to a fresh stock long block and...

This kit popped up for sale semi local to me. I got the serial # from the seller and contacted procharger with it. Head unit is a 1996 made P600B oil fed unit. Never been serviced by them (bribing point for me) My question is, are those brackets useable on a 302 motor? I think the seller said it...

Hey all, there is a guy locally selling one of the older Ford SVO Superchargers, which I believe are based on the M112. It's supposedly modified to work with PI. Is this worth looking into? Anyone on here had/have one? I've been wanting to do a power adder for a couple years now and this seems...

Included is everything shown in photo: supercharger, bracket, piping, 10 rib green belt, crank pulley, bypass valve, catch can, and tubing System has very low miles, never raced, and car was not exposed to exposed to rain, snow, or ice Always ran excellent and the system made 12 lbs of boost...

Included is everything shown in photo: supercharger, bracket, piping, 10 rib green belt, crank pulley, bypass valve, catch can, and tubing System has very low miles, never raced, and car was not exposed to exposed to rain, snow, or ice Always ran excellent and the system made 12 lbs of boost...

Alright so I have a 1996 Mustang GT that I am looking to mod. So far for power upgrades it only has a cold air intake. The engine has 260,000kms. I've got a budget of $3000 Canadian (2250 for you Americans) and I'm trying to plan out my build for this spring. My main thing at the moment is...

I have a 2010 gt with a 400hp whipple kit. I bought it with the kit installed i believe it has 32lb injectors as well. Im looking to upgrade the pulley from a 4” to either a 3.375-3.25” pulley. I wanted to know if i would need to get a base/dyno tune done by someone or if i could just use say an...

So I just bought a Procharger Supercharger for my 3.7 v6! It'll be here in two day. Bought some 60lb injectors to go with it. Now my question is about fuel pumps! What do y'all suggest? I was looking at 415lph fuel pump, but not sure if that is big enough? Also, I'm welcome to all feedback...

There are a few on Facebook marketplace. New ones are in the 7 to 8K range. These are under a grand. Would you or would you not but a used Supercharger? - Yes, I am on a budget and I just want more HP - but not a serious build - second weekend car.

Buy the car - Check Install K&N Cold Air Intake - Check Install Tune - Check Install 3.73 Gears - Check Install Hurst Short Throw shift - Check whats next?

Selling my HKS Adjustable Bypass Valve from my old setup. Great condition, comes with upgraded spring to support 12-18lbs boost. Also works great for vehicles with less than 12lbs boost. Used with Vortech pipe. Standard mounting base. $225 shipped OBO (816)977-5047

I have a belt driven powerdyne system and was wondering where I should attach my vacuum line? It’s on an 88 lx 5.0

How’s it going everyone. New to the Forums, new to the push rod V8s. Been a car guy since i can remember and now im starting a new project. Recently picked up this guy right here. It’s a 94 GT and imvery happy with it so far, love how it sounds, its my favorite to be honest. My old 04 Mach 1 did...

I'm seriously thinking about adding a super charger to my 3.8. Any thoughts or anyone with experience with this? Is it worth it? What can I expect? Thanks folks

2003 Cobra Convertible Redfire Exterior Color Black cloth top Black interior with Gray insert (Alacantara) and leather 68k Miles Price is $21,500 Located in Hoover, AL Built May 27th 2003 and is 3938 of 5082 and about 611 in this combination Original Purchase was at Eckenrod Ford, Cullman AL I...

Hey guys, I purchased a Vortech S-Trim V1 Supercharger and am getting ready to bolt it on. Will be running around 8psi of boost. My only concern has to do with my current X303 cam. To be honest, I really don't want to swap the cam unless it is absolutely necessary. I know the ABC cams are dated...