svt

Hey all - Tried to search many forums and cannot find a solution. I have a 96 cobra that has low compression on all cylinders. However - a leakdown test was performed, and each cylinder seals like it should when the crank is turned manually. Which has me guessing it’s a timing issue? I’ve seen...

1996 Mustang Cobra SVT 5 speed manual, all stock except 4:10 gears, bassani x pipe and flowmaster mufflers on Eibach lowering springs. I removed my driveshaft, took it to a local driveshaft shop and they replaced the u-joints and re-balanced the driveshaft. I put it back on and now I have...

93 LX coupe. I Daily drove it for a couple years before it went into paint. Nice car. 2.3L out of an SVO Mustang. Mild mods to a fully rebuilt stock engine (BNIB Ford replacement 020 pistons, etc). Has roughly 11,000 mi on the rebuild. Runs great. 5 speed manual. It is actually a V6...

How desirable are these? Is $6k a good price? Yes, I know there are no pics. I'm asking for a relative and looking for generalities.

I own a 96 Cobra, and I am having huge trouble with the hoses coming from the CAI to the valve cover, and the hose from the CAI to the IAC. The one going to the valve cover doesnt fit properly causing a vacuum leak, and I cant find the hose anywhere!! Its like it doesnt exist. Then the second...

Up for sale is my 1996 Mystic Cobra. It is build #1985 out of 2000. I have all documentation that it is a mystic, including letters from Ford and SVT verifying. I also have the original window sticker as well. (A copy of the window sticker is shown but I have the actual one framed). Location...

So I've been meaning to get new tires and wheels for my 04 Mustang GT, and I wanted to turn it into a tribute car of the SVT Cobra R. I was thinking about getting the cobra style wheel with a squared setup of 265/40/18's all around. I haven't seen anyone do this before so I'm wondering if it...

Can't seem to find the correct pads for the calipers I have. They are supposed to be for a 2003 Cobra. PBR Castings part #K247-047C 2 Different sets of pads 2 different brands and neither Brands fit! The Spring clips are spaced too wide apart and they don't fit inside the pistons. One set are...

Thanks for checking this out. Few days ago I started hearing a winning noise upon turning the steering wheel and turns out the steering rack and pinion went bad again and the boots are leaking bad. In early 2018 I had it replaced with a remanufactured unit. Is it true that to convert on an 04...

Would like to build a high horsepower car in the next few years hoping to push the 700hp mark. I would love to do this in the 94-98 body style. was wondering what the best motor to use would be? I would rather use a stock motor if possible and upgrade internals and such, was thinking the 5.0...

In the last six months I've replaced the ccrm fpdm fuel pumps and my battery. So I have power going to my evap vent valve and power going to my pumps, but the pumps won't kick on because there's no power going to my fpdm, because of this I've replace the fpdm and the ccrm, what sends power to...

1998 Mustang Cobra, black w/black leather interior, 6-speed manual transmission, Mach-460 AM/FM cassette, cruise control, and power seats. Located in Springfield, VA. Much of the mechanicals have been upgraded or replaced. The engine and paint is original and stock. This car now features a...

Hey ! New to stang net and looking for a 99-04 cobra to fix up(blown motor/transmission, wrecked). I'd like a termi but it isn't a deal breaker to go older. I don't know if there are specific junk yards or if anyone sees one for sale but I've had no luck so far. If you know where or how to find...

Hey ! My names Sam and I've been a Mustang fan for a really really long time (I saw carrol at a car show when I was six, since then basically) but when I was 16 I bought a c4 corvette because horsepower was cheap. Man was it horrible. But now I want a terminator and can't afford a full one so...

Hello everyone. I'm Stephanie. I just signed up to this site after my brother suggested I join a mustang forum. I became obsessed with mustangs towards the end of last year. My neighbor whom I barely know got me obsessed with mustangs. He moved to my neighborhood in 2013, and I saw his car go up...

Up for sale my baby. Currently 62,965 miles. It could go up a bit as I drive it some weekend days. The car is bone stock. I have had it for about 7 years and the last 4 I have driven it very little because I was away from home in the military. The car turn heads everywhere. I will try to upload...

Hello I have a 2002 Mustang 3.8 I am really considering doing this navigator swap! I know I need besides the engine, the Harness, and the ECU. now i am considering for the internals to look at Modular Motorsports Racing! Also they have some 5.0 manifold adapter plates. When i do...

See our 1993 Cobra Grille Insert Kit here: http://www.latemodelrestoration.com/item/LRS-8200F/1987-93-Mustang-93-Cobra-Grille-Insert-Kit 1987-93 FORD MUSTANG 93 COBRA GRILLE INSERT KIT Brand: 50resto Part # LRS-8200F Fits: Ford Mustang GT & LX Years: 1987 (87) - 1988 (88) - 1989 (89) - 1990...

Get Your 94-98 Mustang Odometer Gear Repair Kit Here: http://www.latemodelrestoration.com/item/LRS-17255OG/94-98-Mustang-Odometer-Repair-Gear-Kit Product: 1994-98 Mustang Odometer Gear Repair Kit Fits: Mustang V6 GT Cobra Year Models: 1994 (94) 1995 (95) 1996 (96) 1997 (97) 1998 (98) LRS Part...

The 2013 Shelby GT500 has a sophisticated Launch Control System that takes muscle car drivability to the next level.