02 GT New Tranny wit LTs:(

You can take the tranny out with the Mac LT's tight & in place.

DRAIN THE TRANNY BEFORE YOU START TAKING STUFF APART. Trust me, that's not some stuff you want to take a bath with.Take off the drive shaft obiously & the crossmemeber (&you've already got the starter off). Take the blocking plate bolts loose from the front, then move onto the actual tranny bolts. (i forgot about those bolts & couldn't figure out why the tranny wouldn't come off ). You'll need about 2 feet of extensions & a swivel to get to the top two tranny bolts. They're hard to get to. Some people can get to them without loosening the motor mounts, some can't. I personally have to loosen the motor mounts. (plus it helps to be able to move the motor some). now after you have everything loose & all the tranny bolts out pull out on the tranny & get it off of the dowel pins.

now it'll be resting on the LT's. You're going to need to rotate the tranny counter clockwise to get the bolt ear to clear the header. then you can slide it back farther & start turning it to the passenger side of the car at the same time. It'll come right out.

Also, you'll need to have the car pretty high to get the bellhousing of the tranny out from under the car

oh yeah, & take the 02 sensors out, or else you'll cut the wires to them.