02 lowered 2 inches with dd bullits
- Thread starter BAD88GT
- Start date
possibly but she would probably be ok. i had sportlines (-2") on my 95 with a 17x9 front wheel wrapped with 255/40/17s and i only slightly rubbed the inner fenders lock to lock. did not damage at all, just a little noise. you may have to flip the quad shocks in the rear tho to clear those 315s. rolling the rear quarters may be needed but i doubt it.
fwiw, my 00 is slammed with H&R SS springs and no front isolators. 18x9 fronts, 18x10 rears. 265/35/18s and 295/35/18s and NO rubbing whatsoever.
fwiw, my 00 is slammed with H&R SS springs and no front isolators. 18x9 fronts, 18x10 rears. 265/35/18s and 295/35/18s and NO rubbing whatsoever.
Night Shifter
Well-Known Member
i have sportlines with no isos and 315's and im not even close to having rubbing issues on a 10.5" rim
Rejekt
Member
superstang01
Active Member
I run UPR coilovers in the front with 17x9's and im prbly lowered 2.25 inchs with no rubbing. I cant give you any info on the rears rubbing or not. I know that with 1.5 lowering in the rear, ive never had any rubbing
Rubbing isn't usually a problem on rears since they're stationary. It the steering motion of the fronts that usually cause rubbing.
I had FRPP C springs (about 1.5" drop at the most) and 18x9 00 Cobra R's on my old 01 GT and they rubbed badly in the fron on hard turns.
I know have H&R SS' without iso's (about 2" drop) and stock 17x8 wheels up front on my current GT and there is no rubbing.
I had FRPP C springs (about 1.5" drop at the most) and 18x9 00 Cobra R's on my old 01 GT and they rubbed badly in the fron on hard turns.
I know have H&R SS' without iso's (about 2" drop) and stock 17x8 wheels up front on my current GT and there is no rubbing.
I have sportlines with ISos installed and I run 275 up front and 315 in the rear. Plenty of room outback actually wish I had a 335 in the rear. Now my 275 do rub up front ar partial to almost full lock. Kinda wish I had 255 up front
johnnyt03gt
5 Year Member
