03/04 Eaton M112 to 99 Cobra

[sts-stangmang]

i want to grab an 03/04 used supercharger and throw it on my 99 cobra.

ive already seen some for around $500-600 for the supercharger, elbow and throttle body.

i know im going to need to do some work with my ECU and pulley system other than just bolting this thing on to my car but i dont know what exactly.

can anyone give me a clue, haha?

 

[Gearbanger 101]

Someone around here used to have parts list foating around with all of the parts (right down to the last little clamp) needed to do the conversion. Maybe they'll chime in?

 

[Gearbanger 101]

Found this with a quick google search....

http://www.cardomain.com/ride/3125081

2003 Supercharger Conversion
2R3Z 9F593-BA Genuine Ford 2003 Cobra fuel injector (Eight required)
2R3Z 9E926-AA Genuine Ford 2003 Cobra throttle body
note thise are only brand new parts.
2R3Z 6A946-BA Genuine Ford 2003 Cobra blower belt cover
2R3Z 6F066-AA Genuine Ford 2003 Cobra supercharger
2R3Z 6K775-BA Genuine Ford 2003 Cobra intercooler assembly
2R3Z 9424-BB Genuine Ford 2003 Cobra lower intake
3R3Z 9424-DA Genuine Ford 2003 Cobra upper intake assembly, includes, EGR, Bracket, TB, IAC, and snake emblem
2R3Z 9600-AA Genuine Ford 2003 Cobra air cleaner assembly
2R3Z 6312-BA Genuine Ford 2003 Cobra SC aux drive pulley, idler pulley and mounting bracket
2R3Z 9A758-AA Genuine Ford 2003 Cobra throttle cable
2R3Z 3490-AA Genuine Ford 2003 Cobra P/S Reservoir Bracket
2R3Z 9L443-AA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-BA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-CA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-DA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-EA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9N491-CA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-GA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9L443-FA Genuine Ford 2003 Cobra I/C coolant line
2R3Z 9N491-HA Tube Assembly
2R3Z 9258-CA Bracket
2R3Z 8K226-AA I/C coolant radiator

 

[sts-stangmang]

thanx for the info

 

[COBRA90GT]

Here's a couple of threads:

03/04 Eaton Conversion (96-98, 99+, Mach-1) - Corral Forums by "Denver DOHC Cobra"

03-04 Eaton blower on 99&01 - SVTPerformance

Additionally, if you run a search for keywords "Eaton" or "Eaton swap" in this section (SVT Tech) of the message board, you should be able to find a few past threads on Stangnet that outline the install - it's a pretty frequent question that seems to come up every season.

G'luck.

 

[Uncle Meat]

Most people find that unless they have a complete donor 03/04 Cobra engine the cost of assembling all the stock parts can often outweigh the cost of a complete aftermarket solution designed for your specific application.

U.M.