• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

1/4 mile

  • Thread starter Thread starter coupecop
  • Start date Start date Aug 26, 2006
  • 1
  • 2
Next
1 of 2 Next Last
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#1
  • Aug 26, 2006
  • #1
i just can from the drag strip i just whant to ask does 14.45 at 96.50 sound right . in my openion it a little to slow for my set up .do you think because my cluch is in its last day that will afect me.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Aug 26, 2006
#2
  • Aug 26, 2006
  • #2
What was your 60' a bad 1/4 can be based on many things, but that mph is very lower, something is wrong.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#3
  • Aug 26, 2006
  • #3
my 60 foot was 2.149
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Aug 26, 2006
#4
  • Aug 26, 2006
  • #4
Yea you should be close to 12's with that combo with traction. Maybe around 105mph. Somethings not right.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#5
  • Aug 26, 2006
  • #5
what do you all think is wrong i also have bbk upper and lower control armes annd subframe conecters.
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Aug 26, 2006
#6
  • Aug 26, 2006
  • #6
is it running like ****? lol
 
5

5.0cracker

New Member
Jul 30, 2006
1
0
0
Aug 26, 2006
#7
  • Aug 26, 2006
  • #7
What are you running for tires?

Steve
 
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Aug 26, 2006
#8
  • Aug 26, 2006
  • #8
Your hp numbers seem a little low as well...
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#9
  • Aug 26, 2006
  • #9
It also has a cobra cumputer when you put a new comp do you have to take it to the deals to get it reprogramed. because it used to be acop car and the ariginel comp burned.
 

KENS89LX

Member
Mar 12, 2006
302
1
19
Cross lanes Wv
Aug 26, 2006
#10
  • Aug 26, 2006
  • #10
What rpms are you shifting at?
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#11
  • Aug 26, 2006
  • #11
5.500
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Aug 26, 2006
#12
  • Aug 26, 2006
  • #12
coupecop said:
It also has a cobra cumputer when you put a new comp do you have to take it to the deals to get it reprogramed. because it used to be acop car and the ariginel comp burned.
Click to expand...



what maf and injectors? i have a similar combo. see my sig for times.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 26, 2006
#13
  • Aug 26, 2006
  • #13
its a 80 mas and 24#
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Aug 26, 2006
#14
  • Aug 26, 2006
  • #14
heres what i run without nitrous you can compare i'm stock with a few bolt ones with 3.73 gears as you can see in my sig.shifting at 5200 rpm's.i have run a 14.2 with this combo but i can't find the slip.
rt-.662
60'-2.156
330-6.056
1/8-9.234@77.72 mph.
1/4-14.452@91.20 mph.
217.73 horsepower,286.63 torque
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
Aug 26, 2006
#15
  • Aug 26, 2006
  • #15
I ran a 14.1 with the mods in my sig and new falken ze512 all season tires. Mph was 96. I ran a 8.9 at 77mph with the same mods on a 1/8th mile track. I'd say somethings off because I haven't went internal yet, and you have heads and stuff.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 29, 2006
#16
  • Aug 29, 2006
  • #16
i think i found the probleam i finaly got a fuel pressure gauge and found out i only had 25 psi so i put it to 45 psi hope that helps.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Aug 29, 2006
#17
  • Aug 29, 2006
  • #17
adjust it to 45 unplugged, just make sure.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 29, 2006
#18
  • Aug 29, 2006
  • #18
i have it at 45 plug how much difrence is ther
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Aug 29, 2006
#19
  • Aug 29, 2006
  • #19
about 8 psi, set it to 40 for right now, since you ve been at 25( holy crap), that is with the plug disconnected, it should go to about 32-33 with it connected. should run alot better.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Aug 29, 2006
#20
  • Aug 29, 2006
  • #20
do you think thats giong to help me in the 1/4 mile a little at least. i hope it does
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Paint and Body Rotten moon roof trim
  • Teen'93stang5.0
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
155
Fox 5.0 Mustang Tech Apr 15, 2026
Teen'93stang5.0
M
Too much for me to repair in my current housing situation
  • My Drama Magnet 04 Gt
  • Apr 1, 2026
  • The Welcome Wagon
Replies
8
Views
316
The Welcome Wagon Apr 14, 2026
Noobz347
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
642
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
T
Fox Convertible top issues
  • TDM389
  • Feb 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
321
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 15, 2026
General karthief
Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
261
SVT Tech Forum Feb 20, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?