1/8 mile times and MPH
- Thread starter FoxRod87
- Start date
I think I'll be high 8's. I haven't run this particular car yet but it has:
Stock Heads
Explorer Intake
1" Phenolic Spacer
CAI w/ K&N
Electric Fan
75mm (i think) TB & Spacer
3.73's
Deleted EGR/Smog Pump
Underdrive on the crank
2.5" Exhaust w/ 50 series Flowmasters
1 5/8 Shorty Equal Lengths
Subframe Ties
Some kind of cam- unsure but sounds like an Ecam
The guy I bought it from said he ran a 8.75 with Mickey ET's and I've done a lot of vacuum work and such to the car
Stock Heads
Explorer Intake
1" Phenolic Spacer
CAI w/ K&N
Electric Fan
75mm (i think) TB & Spacer
3.73's
Deleted EGR/Smog Pump
Underdrive on the crank
2.5" Exhaust w/ 50 series Flowmasters
1 5/8 Shorty Equal Lengths
Subframe Ties
Some kind of cam- unsure but sounds like an Ecam
The guy I bought it from said he ran a 8.75 with Mickey ET's and I've done a lot of vacuum work and such to the car
just4bob50
Active Member
Iwas running the 1/8 for a while because I dont have a roll bar to run a full pass in the 1/4, but the last time i was at the track it was made pretty clear that they might not let me run at all even if I sand bag the top end. Anyway my best 1/8 is 8.14 at 85.56 with a 1.82 60ft. The majority of my runs are 8.2's and 8.3's because most of my 60ft times are in the 1.9's. That was with the 6lb pulley on the charger and about 300rwhp. I havent run the car with the 9 lb. pulley yet. mods are in my sig
Flavadave4
Active Member
stock motor,K&N, 3.73's, full exhaust and shortthrow [email protected] with a 2.29 60'
I need some drag radials....i spin horribly
I need some drag radials....i spin horribly
25thmustang
Mustang Master
Stock motor, stock cam, stock heads (GT40 valves, bvalve job) rockers, Cobra intake, TB, MAF, CAI, pulleys, LTs, Prochamber, Catback, clutch, shifter, 3.73s, stock suspension...
7.94 @ 85.6 with a 1.69 60'.
7.94 @ 85.6 with a 1.69 60'.
25thmustang said:
good runing combo very close times compared with mine and a totally diff set up .....
1.9 valve performer heads 1.6 rocker
stock cam
cobra intake
stock t/b and belt fan ....
7.89 @ 86 with a 1.68 60ft
and in the little 2.3t bird ive been 9.50 @ 72 ..... i just realized its abnout as fast as a near stock 5.0 in the 1/8th ...thats awesome
Flavadave4
Active Member
Flavadave4 said:ahhh....i think you are talking about me.....
it wasnt directed at you....but i saw your times and it brought the fact to me ..... in my dads stock 86 i went like 9.30's ... and my buddys 92 with gears and what not goes 9.30's too .....
sorry im going thru one of my little 2.3t stages ... i need to put the stang back together so this ends
Flavadave4
Active Member
25thmustang
Mustang Master
brian15 said:
Do you have 1/4 times from that car? It seems everyone traps similar 1/8 mph as me, yet in the 1/4 are a good 3-4 mph better. I am positive it is the E7s that are causing this, just wanted to know what your car traps. And thanks, I love the stock cam going fast, makes it a nice sleeper!
25thmustang said:
well its a c4 car ...... so im sure it kills some of my mph .... but its been as good as 108.5 in the quarter ..... 1/4 comes by in 12.42.....
im sure i could have got to about 110.....with some work but decide to throw a crower cam in it and some other chages ....
25thmustang
Mustang Master
Yeah my times arent disappointing, its my weak mph. My dads car is similar in the 1/8th and was trapping 108-109. And with about 1 mph more in the 1/8th has seen 111-112. One of the downfalls to the E7s I guess!
Similar threads
